EXR404A Infiniium Real-Time Oscilloscope

Specs:

• 4 Channels
• Channel bandwidth: 4 GHz
• Typical rise/fall time: 107.5 ps

Series Highlights:

• Sample rate, real-time 16 GSa/s, all analog channels
• Sample resolution: 62.5 ps (divide by interpolation factor, if enabled)
• Vertical resolution: 10 bits, up to 16 bits with high-resolution mode
• Real-time update rate: > 200,000 waveforms/sec
• Memory depth: 100 Mpts/channel, all channels
• Analog channel triggering
• Trigger types: Edge, Pulse Width, Glitch, Runt, Time Out, Pattern, Burst
• Serial Data Analysis and Fault Hunter
• Math: Sources, Functions, FFT, Histograms
• Digital Voltmeter: ACRMS, DC, DCRMS; 4 digits; 100/sec
• Counter / Totalizer: A, B, C; Frequency, Period, Totalize, Ratio; 5 to 10 digits; 64 bits
• 15.6-inch capacitive multi-touch, Full HD (1920x1080)
• LAN (RJ-45 connector), USB 3.0 (6 host/ 1 device)
• Combine Two Oscilloscopes for 16-Channel Test with Multiscope (requires separate cabling kit)
• ASIC Technology: Leverages a 100M+ gate CMOS ASIC

Series Options: Waveform generator 50 MHz (EXR2WAV), 16 Digital channels (EXR2MSO), Memory depth (400 Mpts/ch option), Frequency response analyzer 50 MHz (Part of D9110PWRA or included with EXR2WAV)

The Infiniium EXR-Series offers up to 6 GHz of bandwidth and 16 GSa/s sample rate on every single one of its four or eight channels. Combined with 100 Mpts of standard memory per channel, flexible three-stage triggering, over 50 standard measurements, a massive library of application-specific packages, and ASIC-accelerated testing, the Infiniium EXR-Series lets you see more of your signal than ever before.

See More with World-Class Signal Integrity
Its low noise front end includes custom ICs, like the 130 nm BiCMOS IC that incorporates user-selectable analog filters and bandwidth upgrades via a software license. This gives you:

• Four times more vertical resolution than 8-bit oscilloscopes
• Up to 16 bits with high-res mode
• As low as 43 uV of noise, 9.0 bits system ENOB with hardware filtering

Standard History Mode and Segmented Memory Tools
With history mode, simply stop the oscilloscope at any time to review up to 1,024 previous trigger events. With segmented memory, you can capture > 100,000 events post-trigger for analysis, with no limit between events. If your design has an elusive event that only seems to happen when you’re not around, these tools arm the oscilloscope to look for it, then let you review what gets captured at your leisure. And with a full HD screen of 1920x1080 pixels, and support for a second, independent external monitor, that data can be organized and displayed however is best for you.

Complete Control of Your User Interface
With the Infiniium EXR-Series, a second monitor can be used to effectively extend the amount of space you can use to view data thanks to the flexibility of the Infiniium user interface. Organize your waveforms and traces into tabs, separate windows, separate grids, overlay waveforms on top of each other, move data onto separate monitors, and more with a few swipes and taps of your mouse or fingertip.

You can also remotely control your EXR-Series from another Windows 10 PC, with the proper network setup, using the standard Windows 10 feature Remote Desktop Connection.