|
To order, call us at 800-950-3457 or visit us on the web: www.TestEquity.com |
QuadTech Sentry 10 / 20 / 30 Plus Series Hipot Testers |
|
|
|
The Quadtech Sentry Plus Series provide a complete dielectric testing solution.
The Sentry 10 Plus for AC Hipot testing, the Sentry 20 Plus for AC/DC Hipot testing
and the Sentry 30 Plus for AC and DC Hipot tests plus IR measurements. The large
enhanced digital display and user friendly controls of the Sentry Plus instrument
allow test parameters and limits to be easily programmed and viewed. These advanced
digital hipots have excellent load and line regulation to ensure measurement integrity.
Multistep capability allows the user to perform multiple tests in a sequence with
the push of one button.
The Sentry 10 Plus AC Hipot Tester performs AC dielectric withstand (hipot) tests. The test voltage is programmable from 50 V to 5 kV AC with a resolution of 1V. The current range is 1 µA to 20 mA. The Sentry 20 Plus AC/DC Hipot Tester has all the features of the Sentry 10 Plus in addition to DC hipot capability. The test voltage is programmable from 50 V to 6 kV DC with a resolution of 1V. The current range is 0.1 µA to 5 mA. The Sentry 30 Plus AC/DC/IR Hipot Tester has all of the features of the Sentry 20 Plus in addition to Insulation Resistance (IR) testing. The IR measurement range is from 0.1 Megohm to 50 Gigohm with test voltages from 50 to 1000 VDC. Program & Display Ground Continuity: The Sentry Plus Series can measure and display the resistance between the ground blade of the power cord and any exposed metal on the product. Most hipot testers only provide a pass/fail indication. Upgradeable: With the Sentry Plus Series, it is possible to add DC and/or IR test capability without purchasing a new instrument. The Sentry 10 Plus can be upgraded to a Sentry 20 or 30 Plus and the Sentry 20 Plus can be upgraded to a Sentry 30 Plus. Meets UL Hipot Tester Requirements: The Sentry Plus instruments measure
& display the output voltage directly at the output terminals. The instruments
have both visual and audible failure indications, and after a failure the STOP
switch must be pressed prior to another measurement. Includes: Instruction Manual, Power Cable, Test Leads, Ground Continuity Lead, Calibration Certificate Traceable to NIST. |
Pricing Information |
|
|
QuadTech Sentry 10 Plus Hipot Tester AC Only (Special Order) |
Call For Availability |
|
|
|
|
QuadTech Sentry 20 Plus Hipot Tester AC and DC |
$1,995 |
|
|
|
|
QuadTech Sentry 30 Plus Hipot Tester AC and DC, Insulation Resistance |
$2,295 |
|
|
|
Options & Accessories |
|
|
S03 Corded Product Adapter (115 V Receptacle) Adapts the Sentry output (through 6 ft attached cable) to standard 115 V corded products with 3-wire plug. Contains hospital grade receptacle. |
$150 |
|
|
|
|
S07 Power Entry Adapter Cable (IEC Type) Adapts the Sentry output (through 4.5 ft cable) to products with Belden SPH-386 3-wire AC input power plug. |
$130 |
|
|
|
|
S08 Gun Probe Insulated gun probe (with 7 ft attached cable) that allows operator to apply high voltage to the device under test. The probe protrudes from gun barrel when activated by trigger action. For use with Sentry 10-30 and all Guardian units (except 2500 Series). |
$200 |
|
|
|
|
S12 Test Load Box Contains known resistance values for checking tester operation under load. Resistance values are from 200 kohm to 500 kohm in 50 kohm steps. |
$230 |
|
|
|
|
|
To order, call us at 800-950-3457 or visit us on the web: www.TestEquity.com |