• Up to 1,560 W in a 1U package
• Universal input, 85 to 265 VAC
• Power Factor Correction (0.99 typ.)
• Parallel up to 4 units for higher power
• Over-voltage, current and temperature protection
• Constant voltage/constant current
• Independent remote on/off and remote enable/disable
• 15 Store/recall states
• Rotary encoders for voltage and current adjustment
• GPIB, LAN, USB interface included
• Built-in web server for remote monitor and control
• Fully compliant to LXI Class C

The Agilent N5700 Series system DC power supplies give you just the right performance - at just the right price - in a compact (1 U) package. This family of affordable 750 W and 1500 W single-output programmable DC power supplies consists of 24 models for simple DC power applications. They provide stable output power, built-in voltage and current measurement, and output voltage and current from 6 V to 600 V and 1.3 A to 180 A. These economical supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development for R&D, design validation, and manufacturing engineers in the aerospace/defense, automotive, component and communications industries.

Small, High-Density Package Saves You Rack Space
The N5700 provides up to 1500 W in a small space-saving 1 U-high, 19-inch-wide package. Its air vents are in the front, side and rear (not on the top or bottom), so you can stack other instruments directly above or below it to save valuable rack space.

Easy Front-Panel Operation
You can quickly and easily operate the power supply with its rotary knobs and buttons. Using the front-panel controls, you can make coarse or fine adjustments of output voltage and current, protection settings, and set power-on states (last setting memory or factory default setting). The output voltage and current are displayed simultaneously, and LED indicators show power supply status and operating modes. You can lock the front panel controls to protect against accidental power-supply parameter changes.

Extensive Device Protection
To safeguard your device from damage, the N5700 Series power supplies provide over-temperature, over-current and over-voltage protection (OVP) to shut down the power supply output when a fault condition occurs. They also offer an under-voltage limit (UVL) that prevents adjustment of the output voltage below a certain limit. The combination of UVL and OVP capabilities lets you create a protection window for sensitive load circuitry.

Remote Access and Control
The built-in Web server provides remote access and control of the instrument via a standard browser such as Microsoft® Internet Explorer. Using the Web browser, you can set up, monitor and operate the N5700 remotely.

Easy System Integration and Configuration
The N5700 Series power supplies comes standard with GPIB, Ethernet/LAN, and USB 2.0 interfaces giving you the flexibility to use your I/O interface of choice today and in the future. The N5700 is fully compliant with the LXI Class C specification. To simplify system development, the N5700 comes standard with IVI-COM drivers. The N5700 supports the easy-to-use SCPI (Standard Commands for Programmable Instruments).

Should you need greater output power, the N5700 series power supplies give you the flexibility to connect in parallel up to four similarly rated units for greater output current and connect two similarly rated units in series for greater output voltage (see output terminal isolation information).

Analog Programming and Monitoring
The output voltage and current can be programmed from zero to full scale by either an analog voltage 0 to 5 V or 0 to 10 V or by resistances of 0 to 5 kohms or 0 to 10 kohms.

Universal AC input
All N5700 models have universal AC input so they can be automatically operated from any AC mains input voltage worldwide. They can be operated from line voltages of 85 to 265 Vac, 47 to 63 Hz, with no switch to set or fuses to change when you switch from one voltage standard to another. They also provide power factor correction.

Rack Mounting
The rack mount ears and handles are provided standard with every unit. In addition the N5740A rack mount slide kit makes it easy to integrate an N5700 into a test rack by providing all the necessary hardware to rack mount an N5700 series power supply in only 1 U of rack space.

The Agilent N5700 Series System DC power supplies give you just the right performance at just the right price, in a compact (1U) package. This family of affordable 750 W and 1500 W single output programmable DC power supplies simplifies system development and are ideal for simple DC power applications. All models offer GPIB, LAN, and USB 2.0 interfaces standard.

Up to 780 Watts   Up to 1,560 Watts Volts Max Amps Max Model Amps Max Model 0-6 0-100 N5741A 0-180 N5761A 8 90 N5742A 165 N5762A 12.5 60 N5743A 120 N5763A 20 38 N5744A 76 N5764A 30 25 N5745A 50 N5765A 40 19 N5746A 38 N5766A 60 12.5 N5747A 25 N5767A 80 9.5 N5748A 19 N5768A 100 7.5 N5749A 15 N5769A 150 5 N5750A 10 N5770A 300 2.5 N5751A 5 N5771A 600 1.3 N5752A 2.6 N5772A Input Current 100/200 VAC 10.5A/5A 100/200 VAC 21A/11A