• 60, 100, 150 and 200 MHz
• 1 GSa/s maximum sample rate
• Large 5.7-in color display
• Advanced triggering including edge, pulse width, and line-selectable video
• 4 kpts of waveform memory
• USB host and device connectivity, standard
• 20 automatic measurements plus hardware counter and Measure All
• Four math functions, including FFTs standard
• Mask test standard
• GPIB and RS-232 connectivity and SCPI programming available with N2861A communications module (optional)
• Sequence mode (segmented memory) standard

Webcast Invitation - Getting the Most From Your Oscilloscope. CLICK HERE for details.

---

Agilent's DSO3000A Series oscilloscopes give you an affordable way to see what's happening in your designs. They're with the features you need to make your job easier, including a large LCD color display. Choose from four models with bandwidths ranging from 60 MHz to 200 MHz. To give you the debugging power you need, each oscilloscope comes standard with advanced features including sophisticated triggering, automatic measurements, digital filtering, sequence mode acquisition, math functions (including FFTs), stored setups and waveforms, mask testing and much more.

Features you need to get your job done easier and faster.

Easy to set up and use - Dedicated, color-coded knobs for vertical sensitivity, offset, and time base settings make it easy to set up and use. Front-panel keys for triggering functions are also grouped to make your job easier.

Autoscale lets you quickly display any active signals, automatically setting the vertical, horizontal and trigger controls for the best signal display.

Memory - The 3000 Series oscilloscopes come standard with 4 kpts of memory.

Easy connectivity - The 3000 Series oscilloscopes now includes the N2685A USB host module for saving setups, waveforms and displays to a memory stick. This port is also compatible with many USB printers. This scope series also offers Scope Connect software, which provides PC connectivity for data gathering, pass/fail testing, and analysis via the 3000 Series' USB device port. GPIB and RS-232 interfaces are also available with the N2861A connectivity module.

Advanced triggering includes edge, pulse width and line-selectable video, to help you isolate the signals you want to see.

Automatic measurement capability includes 20 voltage and time parameters plus a 5-digit hardware counter. To save time, you can make 18 different measurements simultaneously.

Waveform math with FFTs - Analysis functions include addition, subtraction, multiplication, and Fast Fourier Transforms with four windows (Hanning, Hamming, Blackman- Harris and rectangular).

Auto calibration automatically calibrates the oscilloscope’s vertical and horizontal systems.

Multi-language interface - Operate the oscilloscope in the language of your choice. Language support includes simplified and traditional Chinese, Japanese, Korean, French, German, Italian, Portuguese, Russian and English.

Digital filtering options include low pass, high pass, band pass, and band reject filters. Limits are selectable between 1 kHz and the bandwidth of your oscilloscope model.

Ten waveform and setup memories – Store waveforms or commonly used setups for future reference and use.

Mask testing automatically compares incoming signals with a pre-defined mask, clearly highlighting signal changes.

Sequence mode (segmented memory) lets you frame an area of interest on your signal and record up to 1,000 frames for playback.

Includes: Quick Start manual, CD-ROM with User's Guide and Programmer's Manual, power cord, accessory pouch, two passive probes, Scope Connect software.

---

An affordable way to transfer data and control your scope from a PC

N2860A Scope Connect Software - Now included with each oscilloscope

• Easily manage and transfer data using the 3000 Series' built-in USB port or the optional GPIB and RS-232 ports
• Fully control your DSO3000A Series oscilloscopes from your PC with a GUI that simulates the scope front panel
• Don't miss any data – the virtual display is a pixel-by-pixel equivalent of the current scope display
• Choose between Waveform view, Measurement view, or Data view
• Easily organize acquisition data from the scope in tabular format and export it to spreadsheet applications
• Access all 18 individual channel measurements from your PC

The N2860A Scope Connect software and N2861A communications module provide an affordable way to transfer data from your DSO3000A Series oscilloscope and control it remotely with an external PC. Ideal for use in a lab environment, the N2860A gives you the ability to simultaneously control multiple DSO3000A Series oscilloscopes from a single PC. The easy-to-use graphical user interface (GUI) lets you fully control the scope from your PC with simple mouse clicks. This software provides the easiest way to export data, measurements, pass/fail information, and screen shots for analysis or printing. More info... (pdf, 514K)

N2861A Communications Module

• Provides RS-232 and GPIB connectivity
• Outputs results of pass/fail (limit) testing
• Provides remote control using the DSO3000A Series' SCPI command set (GPIB and RS-232 only).
• Fits easily onto the oscilloscope back panel.
• More info... (pdf, 514K)