• 6.5 Digit Resolution
• Graphical Display
• Basic V dc accuracy of up to 0.0025%
• 100 µA to 10 A Current
• 10 Ohm to 1 GOhm Resistance
• 2x4 Wire Ohms measurement technique
• Frequency, Period, Capacitance & RTD Temperature measurements
• Analytical Modes: TrendPlot™, Histogram and Statistics
• USB Device Port, for memory storage devices (8846A)
• RS-232, GPIB and LAN Interfaces
• Popular DMM emulation modes

The Fluke 8845A and 8846A, 6.5 digit precision multimeters have the precision and versatility to handle your most demanding measurements on the bench or in a system.

Dual Display Offers versatile graphical capabilities: The 8845A and 8846A features a unique graphical display that can reveal signal quality issues like drift, intermittent and stability by viewing the measurement data as a real time TrendPlot™, Histogram or Statistics using the unique analyze mode.

Wide Measurement Ranges: Resistance or current has been extended to cover the widest range possible. The 8846A resistance measurements range is extended from 10 ohm up to 1 GigOhm with a resolution of up to 10 µOhms. For DC current measurements, the 8845A and 8846A ranges from 100 µAmp to 10 Amp with a maximum resolution of 100 pico Amps.

Perform 4-wire measurements easily with two leads: Patented split terminal jacks for 2x4 Ohms function allow you to perform precise 4-wire measurements with only two leads instead of four. Optional Kelvin leads accessories are available to enable you to establish a 4-wire connection even in tight spaces.

Fluke 8846A extended performance and capabilities: The 8846A increases basic V dc accuracy to 0.0025% plus adds measurements like capacitance, RTD temperature and dBm. The 8846A also includes a USB device port to connect a standard USB memory storage devices. USB memory is a convenient way to store or transfer critical data to your PC.

Systems Capabilities: Both instruments include an RS-232, GPIB and Ethernet interface as standard. The Fluke 8845A/8846A emulate operation and programming commands of the Fluke 45 and Agilent 34401A. Emulation shortens the learning curve and makes it easy to fit the 8845A or 8846A into existing test systems.

FlukeView® Forms Basic: The Fluke 8845A/8846A ship with a free copy of FlukeView Basic. Transfer data points from your meter to your PC and use the two standard, noncustomizable forms to display your readings in table or graphical form. For a larger array of forms or to use FlukeView® Forms Designer to customize your forms, upgrade to FlukeView® Forms version 3.0 with FVF-UG.

Feature 8845A 8846A Resolution 6.5 digits Display Dual, Graphical V dc range 1000 V V dc accuracy 0.0035 % + 5 ppm 0.0025 % + 2 ppm V ac range 750 V 1000 V V ac accuracy 0.06 % + 0.03 % Rng V ac freq. response  300 kHz I dc range 10 A Ohms 100 to 300 M 10 to 1G 2x4 Wire Ohms Yes (Test Lead Set Opt.) Yes (Test Leads Included) Frequency & period 3 Hz to 1 MHz Continuity & diode Yes Capacitance — 1 nF to 10 F Temperature — RTD Interfaces GPIB, RS-232, LAN Removable memory — USB memory port Mathematics Min/Max/Avg, Hi/Lo Limit, mX+b

Use the built-in TrendPlot paperless chart recorder to graphically identify the extent of drift and intermittent events in analog circuits.   View results in Histogram mode to reveal stability or noise problems in analog circuits.   Handle even the most demanding measurements with high accuracy and 6.5 digit resolution

Note: Fluke does not include a calibration certificate with these meters.