| Measurement |
Impedance |
Gain-Phase |
| Measurement Parameters |
|Z|, |Y|, Phase, R, X, G, B, L, C, D, Q |
Amplitude (Ratio, Absolute),Phase, Group Delay |
| Test Frequency |
100 Hz to 40 MHz (1 mHz res.) |
10 Hz to 100 MHz (1 mHz res.) |
| Osc level |
10 mV to 1 Vrms (*1) |
-65 dBm to +15 dBm |
| DC Bias |
0 to ±40V, 10 mVres. |
n/a |
| Sweep Parameters |
Frequency, Osc Level, DC Bias |
Frequency, Osc Level |
| Measurement Range |
0.1 mΩ to 1.6 MΩ ±180° |
-107 dBm to +15 dBm, ±180° |
| Basic Accuracy |
±0.17% of reading |
±0.1dB, ±0.5° |
| Measurement Resolution (max) |
0.1 mΩ |
0.001 dB, 0.01° |
Measurement Speed (*2)
(>= 30 kHz) |
4.5 ms per point |
4.0 ms per point |
| Display |
7.5-inch color CRT |
| Display Mode |
Rectangular, Table |
| Display Control |
Autoscale, Superimpose,Storage, Phase Scale Expansion |
| Analysis |
Marker, Line-Cursor, Equivalent Circuit (approximate and
simulate), Arithmetic Operation and Data-register Manipulation |
| Program |
Auto Sequence Program, HP-IB Remote |
*1. 10 mV to 0.5 mV rms at >= 10 MHz
*2. Measurement speed is reference data only |
