• 500, 300, 100 MHz models
• 2 and 4 Channel models
• Up to 2.5 GS/s on all channels
• 5 Meg record length on all channels
• 50,000 wfm/s max. waveform capture rate
• Suite of advanced triggers
• I2C, SPI, CAN, LIN, RS-232/422/485/UART Serial triggering, decode, and analysis
• Wave Inspector controls provide unprecedented efficiency in waveform analysis
• 9" WVGA color display
• USB 2.0 for quick and easy storage
• USB 2.0 device port for direct PC control using USBTMC
• Built-in ethernet port
• Plug-and-Play connectivity and analysis solutions
• TekVPI Probe Interface supports active, differential and current probes for automatic scaling and units
• Only 5.4" deep and 9 lbs.

Trade any working oscilloscope, get 15% off!

Details HERE

The Power to Solve Problems Quickly

The DPO3000 Series digital phosphor oscilloscopes (DPO) deliver the performance you need to visualize even your most demanding signals. Bandwidths range from 100 MHz to 500 MHz and with all models offering a minimum of 5x over-sampling on all channels and sin(x)/x interpolation standard, you can be confident that even the fastest transient events will be captured and displayed accurately. The standard 5 Meg record length on all channels enables you to capture long windows of signal activity while maintaining fine timing resolution. The 50,000 wfm/s waveform capture rate maximizes the probability of capturing elusive glitches and other infrequent events.

The DPO3000 Series offers a variety of analytical solutions including cursors, 29 automatic measurements, statistics and waveform math. Despite a tiny footprint (only 5.4 in. deep) and light weight (9 lbs.), the DPO3000 Series offers exceptional performance, a large 9 in. WVGA widescreen display and knob-per-channel vertical controls.

Designed to Make Your Work Easier with Wave Inspector Navigation
The DPO3000 Series addresses the need for working with long record lengths with the following innovative Wave Inspector controls, just like the DPO4000 Series.

Zoom/Pan. A dedicated, two-tier front-panel knob set provides intuitive control of both zooming and panning through acquired records. The inner knob adjusts the zoom factor (or zoom scale); turning it clockwise activates zoom and goes to progressively higher zoom factors, while turning it counterclockwise results in lower zoom factors and eventually turning zoom off. The outer knob pans the zoom box across the waveform to quickly get to the portion of the waveform you are interested in. The outer knob also utilizes force-feedback to determine how fast to pan on the waveform. The farther you turn the outer knob, the faster the zoom box moves. Pan direction is changed by simply turning the knob the other way. No longer do you need to navigate through multiple menus to adjust your zoom view.

Play/Pause. A dedicated play/pause button on the front panel scrolls the waveform across the display automatically while you look for anomalies or an event of interest. Playback speed and direction are controlled using the intuitive pan knob. Once again, turning the knob further makes the waveform scroll faster and changing direction is as simple as turning the knob the other way.

User Marks. See something interesting on your waveform? Press the Set Mark button on the front panel to leave one or more "bookmarks" on the waveform. Navigating between marks is as simple as pressing the Previous and Next buttons on the front panel.

Search Marks. A robust waveform search feature allows you to search through your long acquisition based on user-defined criteria. All occurrences of the event are highlighted with search marks and are easily navigated to, using the front panel Previous and Next buttons. Search types include edge, pulse width, runt, logic, setup and hold, rise/fall time and I2C, SPI and CAN LIN, and RS-232/422/485/UART packet content.

Serial Triggering and Analysis
Debugging bus and system problems can be difficult, because it is hard to isolate events of interest and it is more difficult to interpret what is displayed on the oscilloscope screen. The DPO3000 Series addresses these problems with powerful tools for serial triggering, display, and analysis.

TekVPI Probing
The TekVPI probe interface sets the standard for ease of use in probing. TekVPI probes feature status indicators and controls, as well as a probe menu button right on the comp box itself. This button brings up a probe menu on the oscilloscope display with all relevant settings and controls for the probe. The TekVPI interface utilizes a new probe power management architecture enabling direct attachment of current probes. Finally, TekVPI probes can be controlled remotely via USB, GPIB or Ethernet, enabling more versatile solutions in ATE environments.

PC Connectivity and USB Mass Storage
The DPO3000 Series delivers an unprecedented new level of PC connectivity. A USB port on the front panel enables easy transfer of screenshots, instrument settings and waveform data. A second USB host port is on the rear panel plus a USB device port for controlling the oscilloscope remotely from a PC. An integrated 10/100 Ethernet port enables easy connection to networks. Provided applications include NI LabVIEW SignalExpress™ Tektronix Edition, OpenChoice® Desktop and Microsoft Excel and Word toolbars enabling fast and easy direct communication with your Windows PC.