• Programmable Output Voltage to 5 kV AC and 6 kV DC (Model 1010 AC only)
• Programmable Ramp and Test Times
• Programmable High and Low Limits
• Quick Discharge of DUT in IR and DC Hipot
• Storage of 99 Tests Setups with Multiple Steps per Measurement
• Remote I/O & RS-232 Interfaces
• Ground Continuity Check with 1 ohm Limit
• Front Panel Lockout
• Arc Detection with Programmable Limit
• Insulation Resistance Measurements from 0.1 Mohms to 50 Gohms (Models 1030, 1030S)
• Built-in 8 Channel Scanner (Model 1030S)

A complete dielectric testing solution, with three models from which to choose. The Guardian 1010 for AC Hipot testing, the Guardian 1030 for AC/DC Hipot testing and insulation resistance (IR) measurements; and the Guardian 1030S which combines both AC and DC Hipot tests and IR measurements with eight HV scan channel capability into a single compact unit. The front panel of the Guardian makes it easy to operate. Digital display and user friendly control allows test parameters and limits to be set easily without the high voltage activated.

The Guardian 1000 Series of electrical safety testers are advanced digital hipots with load and line regulation to ensure measurement integrity. Multistep capability allows the user to perform multiple tests in a sequence such as AC hipot followed by IR.

The Guardian 1010 AC Hipot Tester performs AC dielectric withstand (hipot) tests. The test voltage can be programmed in the range from 50 VAC to 5 kVAC with a resolution of 1 V. The maximum total output current is 30 mA.

The Guardian 1030 AC/DC/IR Hipot Tester has all the features of the Guardian 1010 with the addition of DC hipot and IR measurement capabilities. The test voltage can be programmed in the range from 50 VDC to 6 kVDC with a resolution of 1 V. The maximum total current is 10 mA. The IR measurement range is from 0.1 Megohms to 50 Gigohms with test voltages from 50 to 1000 VDC.

The Guardian 1030S AC/DC/IR/SC Hipot Tester has all of the features of the Guardian 1030 plus eight HV Scan Channels for multi-point testing.

Quick Discharge: In both the DC hipot and IR tests the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge.

Included Accessories:
Guardian 1000 Multi-Purpose AC/DC/IR/SC Series Hipot Testers include instruction manual, power cable, HV test leads, ground continuity lead, and NIST traceable calibration certificate.