Products We Buy Test Equipment Rental Contact About Us What's New

Category
Oscilloscope DC Power Supply Spectrum Analyzer Network Analyzer RF Signal Generator RF Measurement Signal Generator Meter Data Acquisition Environmental Chamber Datacommunication Telecommunication LCR Impedance Logic Analyzer AC Power Source Electronic Load Frequency Counter AC Power Analyzer Accessories Audio Analyzer Connectivity, Software Fiber Optic Hipot, Electrical Safety Calibrator RF Test Accessory Semiconductor TV and Video

Manufacturer
Agilent Tektronix Fluke TestEquity Rohde & Schwarz Xantrex Sorensen Elgar Instek Topward QuadTech Anritsu Aeroflex/IFR/Marconi California Instruments Probemaster Advantest Giga-tronics TTC/Acterna Noise Com Astro-Med Keithley Chroma SRS

Agilent 66111A Fast Transient DC Source

5 A peak current sourcing for next generation data transmission formats
Excellent transient voltage response characteristics prevents test interruptions due to triggering low voltage phone shutdown
Up to 2.8 A current sinking to test built-in battery chargers
Fast transient response, rapid command processing, and high speed output programming time maximize manufacturing test throughput
Low power supply output noise assures less interference with phone operations
Automatically detects open sense wire connections
Ensures correct calibration of charger circuitry
Avoids low voltage shutdown

The Agilent 66111A fast transient DC source is a low cost solution that delivers high throughput and exceptional sourcing capabilities. The 66111A is ideal for applications that do not require the dynamic and microamp measurement capabilities of a 66311B power supply. The 66111A also has an Agilent proprietary feature that helps test engineers avoid improper remote voltage settings and guarantees correct calibration of charger circuitry of the device under test.

66111A Specifications
Number of Outputs	1
Output Ratings (0-55°C)	0-15 V, 0-3 A Peak current for up to 7 ms: 5A
Programming Accuracy (25°C ± 5°C)	0.05% + 10 mV 0.05% + 1.33 A
Ripple and Noise (in the range of 20 Hz to 20 MHz, with outputs ungrounded or with either terminal grounded)	Voltage (rms/p-p) Normal Mode: 1 mV/6 mV Current (rms): 2 mA
DC Measurement Accuracy (via GPIB or front panel meters with respect to actual output at 25°C ± 5°C )	Voltage: 0.03% + 5 mV (+20 mA to +rated I): 0.2% + 9 mA (-20 mA to -rated I): 0.2% + 9 mA
Load Regulation	Voltage: 2 mV Current: 0.75 mA
Line Regulation	Voltage: 0.5 mV Current: 0.75 mA
Transient Response Time (for output to recover to within 20 mV of final value after 0.1 to 1.5 A load change in high mode compensation range)	< 35 us
Supplemental Characteristics
Average Programming Resolution	Voltage: 3.75 mV Current: 0.67 mA
Sink current	-2 A @ 7.5 V
Transient Voltage Dip (typical with up to 15 feet 22 AWG wiring)	70 mV
DC Floating Voltage	Output terminals can be floated up to ±50 VDC maximum from chassis ground.
Remote Sensing	Up to 4 volts can be dropped in each load lead. Add 2 mV to the voltage load regulation specification for each 1 volt change (in the positive output lead) due to load current change
Command Processing Time	Average time required for the output voltage to begin to change following receipt of digital data is 4 ms for power supplies connected directly to the GPIB.
Output Programming Response Time	The rise and fall time (10/90% and 90/10%) of the output voltage is less than 200 us.
Output Voltage Settling Time	The output voltage change settles within 1 LSB (0.025% X rated voltage) of final value in 2 ms.
Measurement Time	Average time to make a voltage or current measurement is 50 ms.
GPIB Interface Capabilities	IEEE 488.2, SCPI command set and Agilent 6630A Series programming compatibility.
Input Power (full load): 47-63 Hz	115 VAC mains (104-127 Vac): 1.4 A, 100 W
Regulatory Compliance	Listed to UL 3111-1, certified to CSA C22.2 no. 1010.1-92; conforms to EN61010-1; conforms to IEC 1010-1, complies with European EMC and Low Voltage directives, carries the CE mark. Also complies with the Australian EMC requirements and carries the C-tick mark.
Physical Specifications
Weight	8.85 kg (19.5 lb) net 11.1 kg (24.5 lb) shipping
Size	88.1 mm H x 212.8 mm W x 444.4 mm D (3.5 in x 8.4 in x 17.5 in )

This product is available for rent. For more information about our rental policies and financing plans please refer to our Rental/Leasing page. For pricing and availablity information please give us a call or E-Mail our sales department.

Shopping Legend

	Put a quote request together for our sales staff to research for you.
	Add items to your shopping cart to buy on-line. Free shipping included!

PRICING INFORMATION

Agilent 66111A Fast Transient DC Source

Sold new for $1,559
TestEquity Price $995

RELATED ITEMS

Agilent 66309B/D, 66311B/D, 66319B/D, 66321B/D Mobile Communications DC Sources Mobile Communication Simulation

Home Products by Category Products by Mfr.	Rental Information Leasing Information	Sell Your Used Test Equipment Contact Us
NEED HELP SELECTING WHAT TEST EQUIPMENT IS RIGHT FOR YOU? Put the experts at TestEquity to work for you. For sales, rentals, lease quotes, and product availability worldwide, give us a call!