Fluke FLUKE 8808A Digital Multimeter
Includes FlukeView Forms basic version and the USB to RS-232 interface adapter cable.
ITEM #: 16692.1 (REF #: 04122.W)
Suggested Retail Price $810 TestEquity Price$729
Fluke FLUKE 8808A/SU Digital Multimeter with Software Upgrade and Case
Includes 8808A package plus, FlukeView Forms Upgrade software and carrying case.
ITEM #: 16692.5 (REF #: 04123.W)
884X-SHORT 4-Wire Short
4-terminal shorting bar. 4 mm banana terminals sized and orientated to short DMM input source and sense terminals. Used to null out front end offsets or as required by the calibration procedure
ITEM #: 03520.W
884X-USB USB to RS-232 Cable Adapter
Converts from standard DB 9-pin serial to USB 2.0. 1.65 m cable length. Includes cable and USB driver disk (CD-ROM).
ITEM #: 17306.1 (REF #: 03518.W)
TL2X4W-PTII 2x4 Wire OhmsTest Lead, 2 mm Probe Tip
Perform 4-wire measurements with only two test leads. Two conductors per lead (one source and one measure).
ITEM #: 03519.W
TL910 Electronic Test Probes
Very small 1 mm tips to access hard-to-reach test points. Probe tip length up to 100 mm, test lead length: 1 m. Included: 3 sets of spring loaded gold tips and 2 sets of stainless steel tips. CAT IV 600 V, CAT III 1000 V, 3 A rating.
ITEM #: 15329.1 (REF #: 02986.W)
Y8846D Rack Mount Kit, Dual
Enables mounting two meters side-by-side in a standard 19-inch rack
ITEM #: 16410.1 (REF #: 03516.W)
Y8846S Rack Mount Kit, Single
Enables mounting one meter in a standard 19-inch rack
ITEM #: 16364.1 (REF #: 03645.W)
The Fluke 8808A multimeter has a broad range of functions, measuring volts,
ohms and amps with a basic V dc accuracy of 0.01%. It is remarkably easy to
use, even by unskilled operators, because it makes the measurements you perform
most often extremely easy and fast to do.
Six setup buttons on the 8808A front panel operate like a car radio's station
presets. Simply set up the meter for a common measurement, then press shift
followed by a setup button (S1 to S6) to save the setup. Now each time you
perform that measurement, you simply press the appropriate setup key. It's
The setup buttons eliminate the need to follow complex work instruction sheets.
Operators no longer need to press multiple buttons to set up a measurement
function and range, test limits, or enter other parameters to make a measurement.
Measure two parameters at once The 8808A features a unique dual display that allows you to measure two
different parameters of the same signal from one test connection. Looking at
dual interrelated parameters like voltage and current simultaneously can reveal
conditions that might go unnoticed otherwise, greatly simplifying test and
Measure sensitive leakage current Using a typical multimeter to perform a sensitive low current measurement
of less than 100 mA can load the circuit under test while the measurement is
made. This makes it difficult, if not impossible, to perform tasks such as
determining the leakage current on a battery-powered device while it is powered
down. The Fluke 8808A is the only multimeter in its class to use a high impedance
input technique to perform this type of critical leakage current measurement.
In this special mode, the 8808A can measure small currents with a resolution
of up to 100 nA, without loading the circuit under test.
Includes: Meter, TL71 test leads, line cord, USB to RS-232 interface adapter cable, FlukeView Forms Basic Software, statement of cal practices, WEEE information sheet, Warranty statement, Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese), CD Rom with user manual (English).
Note: Fluke does not include a calibration certificate with these meters.