Magna-Power Electronics TS Series III DC Power Supplies

Additional Product Information

Magna-Power Electronics TS Series combines the best of DC power processing with microprocessor embedded control. Magna-Power Electronics' innovative power processing technology improves response, shrinks package size, and reduces cost. TS Series power supplies are current-fed and are more tolerant to abusive loads than conventional switching power supplies (more about current-fed technology here). This technology allows the power supply to operate under short-circuit conditions, open-circuit conditions, and everything in between.

TS Series power supplies offer both master/slave parallel and series operation. This enables two or more power supplies to be placed in parallel for increased output current or in series for increased output voltage. With master/slave operation, power supplies operate at near equal voltage and current.

TS Series power supplies can operate as a voltage source or current source depending on the control settings and load conditions. If the power supply is operating as a voltage source and the load increases to a point beyond the current command setting, the power supply automatically crosses over to current mode control and operates as a current source at that setting.

TSA Version Front Panel
TSA models provide stepless analog control from front panel knobs. With a simple configuration change, the power supply can be programmed from the rear I/O connector or through software on one of the communication buses.

TSD Version Front Panel
TSD models provide all of the features of the TSA Version plus these models can be configured for keypad entries and up/down presses for voltage, current, over voltage trip, and over current trip. Key strokes are kept to a minimum by a repeat last command feature. TSD Series power supplies are well suited for laboratory applications requiring enhanced control.

TSD Series models have one-hundred memory states available to program voltage, current, over voltage trip, over current trip, and time period. Set points can be auto sequenced with time or external triggering. Special programming codes allow repeating to create a power function generator. The first 10 memory states are displayed on the front panel to simplify programming tasks. TSD Series power supplies offer an analog input to modulate the voltage or current setting using piecewise linear approximation. This feature enables the voltage or current setting to be adjusted by a sensor input, such as a thermistor, or by monitoring its own voltage or current. Modulation allows the output to be tailored for advanced process control applications, battery charging, and source emulation.

TSC Version Front Panel
TSC models hava a blank front panel and only allows control from the rear I/O connector or by RS-232/GPIB/USB/Ethernet communications. These models are intended for process control applications where front panel controls and displays are not required nor desired.

Optional Water Cooling (must be specified at time of order)
Optional water cooled models contain integrated semiconductor chillers and air to water heat exchangers to manage cooling of heat producing components. This option allows the power supply to be sealed from the environment enabling placement in harsh environments. These units provide long life in plating facilities, electrodionization treatment plants, shipboard, and other corrosive environments. Water cooling also permits power supplies to be stacked in high density equipment racks where air cooling is not possible or desirable.

Flexible Operation and Programming
The power supply can be programmed to have its control functions accessible from the front panel (except TSC Models), rear connector, or through RS-232, optional GPIB, or optional LAN (LXI-C) communications with built-in webserver. USB and RS-485 converters are also available. TS Series power supplies incorporate an optically isolated feedback system. The result is that all user interface circuitry is referenced to earth ground -- not the negative terminal of the power supply. This enables users to connect external circuitry without concern of ground loops or voltage breakdown.

Remote Interface Software
The Remote Interface Software is shipped with all TS SERIES power supplies. The software provides the user with a quick method to operate a Magna-Power Electronics' power supply under computer control. The Remote Interface Software has six windows: the Virtual Control Panel, Command Panel, Register Panel, Calibration Panel, Firmware Panel, and Modulation Panel. The Virtual Control Panel emulates the front panel of the TS SERIES power supply, the Command panel programs and reads SCPI commands with user friendly buttons, the Register Panel programs and reads registers, the Calibration Panel enables calibration of the digital potentiometers, the Firmware Panel enables the program stored internal to the power supply to be upgraded, and the Modulation Panel eases programming of modulation parameters.

Standard Voltage and Current Ratings

Input Voltage (Must be specified at time of order)

1 phase, 2 wire + ground (5 kW, 10 kW, and 15 kW models only)
208 VAC, 1 φ (operating range 187 - 229 VAC) add $100
240 VAC, 1 φ (operating range 216 - 264 VAC) add $100

3 phase, 3 wire + ground (all models)
208 VAC, 3φ (operating range 187 - 229 VAC)
240 VAC, 3φ (operating range 216 - 264 VAC)
380 VAC, 3φ (operating range 342 - 418 VAC)
415 VAC, 3φ (operating range 373 - 456 VAC)
440 VAC, 3φ (operating range 396 - 484 VAC)
480 VAC, 3φ (operating range 432 - 528 VAC)

Model Number Example:
TS Series, A Version front panel, 40 Volts, 375 Amps, 480 VAC 3φ input
TSA40-375/480

TS Series, A Version front panel, 40 Volts, 375 Amps, 240 VAC 1 φ input
TSA40-375/240SP

NOTE:

• Models over 15 kW are intended for rack mount installations only. They are not designed for benchtop use due to exposed input and output terminals.
• GPIB and Ethernet are optional and must be specified at time of order.
• Power cords are not included.

Pricing available for sale within USA and Canada. Warranty only applies to customers in the USA and Canada.

PRICING INFORMATION

Magna-Power Electronics TS 5 kW Models, to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $4,495
Magna-Power Electronics TS 5 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $6,595
Magna-Power Electronics TS 10 kW Models, to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $6,295
Magna-Power Electronics TS 10 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $8,395
Magna-Power Electronics TS 15 kW Models, to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $8,395
Magna-Power Electronics TS 15 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $10,495
Magna-Power Electronics TS 20 kW Models, to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $11,045
Magna-Power Electronics TS 20 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $14,195
Magna-Power Electronics TS 25 kW Models, to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $13,245
Magna-Power Electronics TS 25 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $16,395
Magna-Power Electronics TS 30 kW Models. to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $14,995
Magna-Power Electronics TS 30 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $18,195
Magna-Power Electronics TS 45 kW Models, to 1000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $20,895
Magna-Power Electronics TS 45 kW Models, 1500 V to 4000 V DC Power Supplies Specify voltage and current range from tables above.	TestEquity Price $25,095

OPTIONS & ACCESSORIES

GPIB Internal GPIB Interface	TestEquity Price $595
Ethernet Internal Ethernet Interface (LXI)	TestEquity Price $395
USB External USB Interface Converter Converts RS-232 interface to USB.	TestEquity Price $125
485DSS External RS-485 Interface Converter Converts RS-232 interface to RS-485.	TestEquity Price $175
EMI Filter For 5 kW and 10 kW Models	TestEquity Price $395
EMI Filter For 15 kW Models	TestEquity Price $495
EMI Filter For 20 kW Models	TestEquity Price $795
EMI Filter For 25 kW and 30 kW Models	TestEquity Price $1,095
EMI Filter For 45 kW Model	TestEquity Price $1,495
TSA Version Front Panel No Charge	TestEquity Price $0
TSC Version Front Panel Subtract $100 from base model price.	Call For Availability
TSD Version Front Panel Add $350 to base model price.	TestEquity Price $350
Water Cooling For 5 kW through 15 kW Models	TestEquity Price $495
Water Cooling For 20 kW through 30 kW Models	TestEquity Price $990
Water Cooling For 45 kW Models	TestEquity Price $1,485
UID46 Interface Device For Master/Slave Connections	TestEquity Price $345

RELATED ITEMS

Magna-Power Electronics XR Series II DC Power Supplies 2 kW to 8 kW