|
|
|
|
||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|---|
Magna-Power Electronics MS Series III DC Power Supplies
|
|
Additional Product Information
Instruction Manual (pdf, 5M) >>Specifications (pdf, 1.7M) >>
About Magna-Power Electronics >>
Overview of Current-fed Power Processing >>
Innovative
Magna-Power Electronics MS Series combines the best of dc power processing
with multiprocessor embedded control. A combination of high and medium frequency
power processing technologies improves response, shrinks package size, and
reduces cost. MS Series power supplies are current fed and are more tolerant
to abusive loads than conventional switching power supplies.
Scalable Power
MS Series power supplies offer both master/slave parallel and series operation.
This enables two or more power supplies to be placed in parallel for increased
output current or in series for increased output voltage. With master/slave
operation, power supplies operate at near equal voltage and current.
Unparalelled Control
MS Series power supplies can be configured through the front panel for different
applications. The power supply can be programmed to have its control functions
accessible from the front panel, rear connector, or through RS-232, optional
GPIB, or optional LXI TCP/IP Ethernet communications. Sensing
can be established at the output terminal of the power supply or through a
rear terminal block for sensing at the load. An external interlock can be set
to enable operation only when an external connection is made. Even calibration
has been simplified with front panel access to calibration digital potentiometers.
MS Series power supplies incorporate an optically isolated feedback system.
The result is that all user interface circuitry is referenced to earth ground
-- not the negative terminal of the power supply. This enables users to connect
external circuitry without concern of ground loops or voltage breakdown.
Load Dependent Air or Optional Water Cooling
MS Series power supplies are designed to operate at rated load 24 hours per
day. Standard air cooled units are equipped with variable speed, load dependent
blowers to maintain comfortable margins for removing heat from sensitive power
semiconductors. Variable speed operation maximizes fan life and a minimizes
external environmental hazards. Optional water cooled models contain integrated
semiconductor chillers and air to water heat exchangers to manage cooling of
heat producing components. This option allows the power supply to be sealed
from the environment enabling placement in harsh environments. These units
provide long life in plating facilities, electrodionization treatment plants,
shipboard, and other corrosive environments. Water cooling also permits power
supplies to be stacked in high density equipment racks where air cooling is
not possible or desireable.
Designed for Safety
MS Series power supplies have extensive diagnostic functions -- all of which,
when activated, take command to shut down the system. Diagnostic functions
include phase loss, excessive thermal conditions, over voltage trip, over current
trip, fuse clearing, and program line. Program line monitors externally applied
analog set point signals to insure they are within the specified range. Upon
a diagnostic fault condition, main power is disconnected and the diagnostic
condition is latched into memory. Pressing the clear key clears the memory.
All diagnostic functions can be monitored through a rear connector. Furthermore,
control functions can also be set through the rear connector to allow simultaneous
control of one or more MS Series units. MS Series supplies have three levels
of over voltage/current protection: shutdown of controlling insulated gate
bipolar transistors (IGBT’s), disconnect
of main power, and input fuses. After an over voltage/current trip condition,
the supply must be reset.
MSA Version Front Panel
MSA models provide stepless analog control from front panel knobs. With a
simple configuration change, the power supply can be programmed from the rear
I/O connector or through software on one of the communication buses.
MSD Version Front Panel
MSD models provide all of the features of the MSA Version plus these models
can be configured for keypad entries and up/down presses for voltage, current,
over voltage trip, and over current trip. Key strokes are kept to a minimum
by a repeat last command feature. MSD Series power supplies are well suited
for laboratory applications requiring enhanced control.
MSD Series models have one-hundred memory states available to program voltage,
current, over voltage trip, over current trip, and time period. Set points
can be auto sequenced with time or external triggering. Special programming
codes allow repeating to create a power function generator. The first 10 memory
states are displayed on the front panel to simplify programming tasks. MSD
Series power supplies offer an analog input to modulate the voltage or current
setting using piecewise linear approximation. This feature enables the voltage
or current setting to be adjusted by a sensor input, such as a thermistor,
or by monitoring its own voltage or current. Modulation allows the output to
be tailored for advanced process control applications, battery charging, and
source emulation.
MSC Version Front Panel
MSC models hava a blank front panel and only allows control from the rear
I/O connector or by RS-232/GPIB/USB/Ethernet communications. These models are
intended for process control applications where front panel controls and displays
are not required nor desired.
 Remote
Interface SoftwareThe Remote Interface Software is shipped with all MS Series power supplies. The software provides the user with a quick method to operate a Magna-Power Electronics' power supply under computer control. The Remote Interface Software has six windows: the Virtual Control Panel, Command Panel, Register Panel, Calibration Panel, Firmware Panel, and Modulation Panel. The Virtual Control Panel emulates the front panel of the MS Series power supply, the Command panel programs and reads SCPI commands with user friendly buttons, the Register Panel programs and reads registers, the Calibration Panel enables calibration of the digital potentiometers, the Firmware Panel enables the program stored internal to the power supply to be upgraded, and the Modulation Panel eases programming of modulation parameters. |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pricing available for sale within USA and Canada. Warranty only applies to customers in the USA and Canada.
|
|
PRICING INFORMATION
|
Magna-Power Electronics MSA 30 kW, 1500 to 4000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $20,395
|
|
 |
||
|
Magna-Power Electronics MSA 30 kW, 16 to 1000 V Models DC Power Supplies Specify voltage and current range from tables above. |
TestEquity Price $17,245
|
|
|
|
||
|
Magna-Power Electronics MSA 45 kW, 1500 to 4000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $27,295
|
|
|
|
||
|
Magna-Power Electronics MSA 45 kW, 16 to 1000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $23,095
|
|
|
|
||
|
Magna-Power Electronics MSA 60 kW, 1500 to 4000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $34,295
|
|
|
|
||
|
Magna-Power Electronics MSA 60 kW, 16 to 1000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $28,995
|
|
|
|
||
|
Magna-Power Electronics MSA 75 kW, 1500 to 4000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $40,995
|
|
|
|
||
|
Magna-Power Electronics MSA 75 kW, 16 to 1000 V Models DC Power Supply Specify voltage and current range from tables above. |
TestEquity Price $34,695
|
|
|
|
||
OPTIONS & ACCESSORIES
|
MSA Version Front Panel No Charge |
TestEquity Price $0
|
|
|
|
||
|
MSC Version Front Panel Subtract $100 from base model price. |
Call For Availability
|
|
|
|
||
|
MSD Version Front Panel Add $350 to base model price. |
TestEquity Price $350
|
|
|
|
||
|
EMI Filter For 60 kW Models |
TestEquity Price $1,795
|
|
|
|
||
|
EMI Filter For 75 kW Models |
TestEquity Price $1,995
|
|
|
|
||
|
EMI Filter For 30 kW Models |
TestEquity Price $1,095
|
|
|
|
||
|
EMI Filter For 45 kW Models |
TestEquity Price $1,495
|
|
|
|
||
|
Ethernet Internal Ethernet Interface (LXI) |
TestEquity Price $395
|
|
|
|
||
|
GPIB Internal GPIB Interface |
TestEquity Price $595
|
|
|
|
||
|
USB External USB Interface Converter Converts RS-232 interface to USB. |
TestEquity Price $125
|
|
|
|
||
|
485DSS External RS-485 Interface Converter Converts RS-232 interface to RS-485. |
TestEquity Price $175
|
|
|
|
||
|
UID46 Interface Device For Master/Slave Connections |
TestEquity Price $345
|
|
|
|
||
|
Water Cooling For 30 kW Models |
TestEquity Price $990
|
|
|
|
||
|
Water Cooling For 45 kW Models |
TestEquity Price $1,485
|
|
|
|
||
|
Water Cooling For 60 kW Models |
TestEquity Price $1,980
|
|
|
|
||
|
Water Cooling For 75 kW Models |
TestEquity Price $2,475
|
|
|
|
||
Put the experts at TestEquity to work for you. For sales, rentals,
lease quotes, and product availability worldwide, give us a call!