Brand New Test Equipment

QuadTech Guardian 1010, 1030, 1030S Hipot Testers

---

Additional Product Information

Data Sheet (pdf, 69K) >>
Electrical Safety Selection Guide >>

A complete dielectric testing solution, with three models from which to choose. The Guardian 1010 for AC Hipot testing, the Guardian 1030 for AC/DC Hipot testing and insulation resistance (IR) measurements; and the Guardian 1030S which combines both AC and DC Hipot tests and IR measurements with eight HV scan channel capability into a single compact unit. The front panel of the Guardian makes it easy to operate. Digital display and user friendly control allows test parameters and limits to be set easily without the high voltage activated.

The Guardian 1000 Series of electrical safety testers are advanced digital hipots with load and line regulation to ensure measurement integrity. Multistep capability allows the user to perform multiple tests in a sequence such as AC hipot followed by IR.

The Guardian 1010 AC Hipot Tester performs AC dielectric withstand (hipot) tests. The test voltage can be programmed in the range from 50 VAC to 5 kVAC with a resolution of 1 V. The maximum total output current is 30 mA.

The Guardian 1030 AC/DC/IR Hipot Tester has all the features of the Guardian 1010 with the addition of DC hipot and IR measurement capabilities. The test voltage can be programmed in the range from 50 VDC to 6 kVDC with a resolution of 1 V. The maximum total current is 10 mA. The IR measurement range is from 0.1 Megohms to 50 Gigohms with test voltages from 50 to 1000 VDC.

The Guardian 1030S AC/DC/IR/SC Hipot Tester has all of the features of the Guardian 1030 plus eight HV Scan Channels for multi-point testing.

Quick Discharge: In both the DC hipot and IR tests the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge.

Ground Continuity Check: All of the Guardian 1000 Series units have a ground continuity check feature to determine that the resistance, between the ground blade of the power cord and any exposed metal on the product, is less than 1 ohm.

Included Accessories:
Guardian 1000 Multi-Purpose AC/DC/IR/SC Series Hipot Testers include instruction manual, power cable, HV test leads, ground continuity lead, and NIST traceable calibration certificate.

PRICING INFORMATION

QuadTech Guardian 1010 Hipot Tester AC Hipot Only	TestEquity Price $3,775
QuadTech Guardian 1030 Hipot Tester AC/DC Hipot, Insulation Resistance	TestEquity Price $4,695
QuadTech Guardian 1030S Hipot Tester AC/DC Hipot, Insulation Resistance, Scanner	TestEquity Price $5,935

OPTIONS & ACCESSORIES

G13 Corded Product Adapter (115 V Receptacle) Adapts the output (through 6 ft cable) to standard 115V corded products with 3-wire plug. Contains hospital grade receptacle.	TestEquity Price $250
G38 Printer Interface Parallel interface option for Guardian Series Testers. Connection is 25 pin connector installed on rear panel and takes the place of the GPIB interface.	TestEquity Price $795
G39 GPIB Interface	TestEquity Price $540
S07 Power Entry Adapter Cable (IEC Type) Adapts the Sentry output (through 4.5 ft cable) to products with Belden SPH-386 3-wire AC input power plug.	TestEquity Price $225
S08 Gun Probe Insulated gun probe (with 7 ft attached cable) that allows operator to apply high voltage to the device under test. The probe protrudes from gun barrel when activated by trigger action. For use with Sentry 10-30 and all Guardian units (except 2500 Series).	TestEquity Price $350
S09 HV Lead, 1 meter Unterminated	TestEquity Price $65
S10 HV Lead, 2 meters Unterminated	TestEquity Price $80
S11 Gun Probe with Remote Start (trigger to start the tester)	TestEquity Price $485

RELATED ITEMS

QuadTech Guardian 1050 Ground Bond Tester 3 to 45 Amps AC

QuadTech Sentry 20 Plus, Sentry 30 Plus Series Hipot Testers 5kV AC/6kV DC, Insulation Resistance, GFI

QuadTech Sentry 50 Plus Ground Bond Tester 3 to 30 Amps AC