The Model 7002 Switch System is a 10-slot mainframe providing high signal integrity and tremendous flexibility. More than 30 types of available switch cards make the 7002 one of the most flexible switching mainframes available. The 7002 can switch signals from femtoamps to amps, nanovolts to kilovolts, and DC to 1GHz. Support for up to 400 2-pole multiplexer channels or matrix crosspoints reduces the amount of switching hardware required for a given application.
Setup and maintenance are simplified by the interactive, graphical channel status display and optional light pen.
Signal integrity is maintained by the careful design techniques that minimize channel cross-talk, EMI/RFI interference, and power line disturbances - both in the mainframe and on the cards.
Ultra-high throughput is achieved through the use of programmable scan lists, memory patterns, and triggering which enable the 7002 to synchronize with and control other instruments in the ATE rack without the need or overhead of a PC.
| System Modules |
| 7011-C -
7011-S |
40-Channel Multiplexer Cards |
7037-D |
30-Channel Digital I/O Card |
| 7012-C - 7012-S |
4x10 Matrix Cards |
7038 |
2 GHz Multiplexer Card |
| 7013-C - 7013-S |
20-Channel Isolated Switch Cards |
7053 |
High Current Switching Card |
| 7014 |
39-Channel Thermocouple Mux Card |
7065 |
Hall Effect Card |
| 7015-C - 7015-S |
40-Channel Thermocouple Mux Cards |
7067 |
Four-Wire Scanner Card |
| 7016A |
50-Ohm Multiplexer Card |
7090 |
Optical Switch Card |
| 7017 |
800MHz Multiplexer Card |
7111-S |
40-Ch Form C Switch Card |
| 7018-C - 7018-S |
28-Channel Multiplexers |
7152 |
Low Current Matrix Card |
| 7019 |
6-Wire Ohms Matrix Card |
7153 |
High Voltage Low Current Matrix Card |
| 7020 - 7020-D |
Digital I/O Cards |
7154 |
10-Channel, HV Scanner Card |
| 7021 |
Multiplexer-Digital I/O Card |
7158 |
Low Current Scanner Card |
| 7035 |
40-Channel Relay Switch Card |
7168 |
Nanovolt Scanner Card |
| 7036 |
2 GHz Multiplexer Card |
|