Eligible Products:
Oscilloscopes
| Promo Model No. |
Upgraded Bandwidth | Channels | Included Option Packages | List Price | Promo Price |
|---|---|---|---|---|---|
|
|
300 MHz | 2 analog/8 digital | AWG, Mixed Signal upgrade, I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN serial triggering and decoding | $1,192 | |
|
|
300 MHz | 4 analog/16 digital | AWG, Mixed Signal upgrade, I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN serial triggering and decoding, frequency response analysis, history and segmented memory with 160 Msample | $3,192 | |
|
|
1 GHz | 4 analog/16 digital | AWG, Mixed Signal upgrade, I2C, SPI, UART/RS-232/RS-422/RS-485, I2S LJ/RJ/TDM, MIL-1553, ARINC 429, CAN/LIN serial triggering and decoding, power analysis, frequency response analysis, history and segmented memory with 1,000 Msample (1 Gsample) | $7,999 | |
|
|
500 MHz | 4 analog/8 digital | Mixed Signal upgrade, I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, CAN-FD, SENT serial triggering and decoding, spectrum analysis, frequency counter, advanced trigger, harmonic analysis, wifi, remote control, history and segmented memory with 25 Msample | $6,000 | |
|
|
2.5 GHz | 4 analog / 16 digital | I²C, SPI, UART/RS-232/ RS-422/RS-485, CAN, LIN | $6,792 |
Spectrum Analyzers
| Promo Model No. |
Frequency | Option Packages | List Price | Promo Price |
|---|---|---|---|---|
|
|
5 kHz to 3 GHz | Tracking generator, VNA, signal generator, preamplifier, modulation analysis, receiver mode, advanced measurements | $4,000 | |
|
|
5 kHz to 1 GHz |
Wi-Fi-enabled, supported by included remote control software, 10.1" WXGA Display (1366 x 768 pixel), Low noise floor / High max. input power |
$1,779 | |
|
|
5 kHz to 3 GHz |
Analysis bandwidth, 10 MHz, opt. 40 MHz, Phase noise at 1 GHz (10 kHz offset), typ. –108 dBc (1 Hz), Phase noise at 1 GHz (1 MHz offset), typ. –135 dBc (1 Hz), Overall amplitude, accuracy 0.8 dB, TOI at 1 GHz, typ. +20 dBm, Standard attenuator, range 45 dB, Attenuator step, options 5 dB, opt. 1 dB, 10.1" display with multipoint touchscreen operation |
$11,772 | |
|
|
5 kHz to 7.5 GHz |
Analysis bandwidth, 10 MHz, opt. 40 MHz, Phase noise at 1 GHz (10 kHz offset), typ. –108 dBc (1 Hz), Phase noise at 1 GHz (1 MHz offset), typ. –135 dBc (1 Hz), Overall amplitude, accuracy 0.8 dB, TOI at 1 GH,z typ. +20 dBm, Standard attenuator, range 45 dB, Attenuator step options, 5 dB, opt. 1 dB |
$14,436 | |
|
|
5 kHz to 4 Ghz |
Phase noise: –95 dBc (1 Hz), (f = 500 MHz, 30 kHz offset), DANL preamplifier OFF: < –140 dBm, typ. –144 dBm, DANL preamplifier ON: < –156 dBm, typ. –161 dBm, TOI: +10 dBm |
$6,008 | |
|
|
5 kHz to 8 Ghz |
Phase noise: –95 dBc (1 Hz), (f = 500 MHz, 30 kHz offset), DANL preamplifier OFF: < –135 dBm, typ. –140 dBm, DANL preamplifier ON: < –150 dBm, typ. –155 dBm, TOI: +10 dBm |
$8,088 |
Power Supplies
| Promo Model No. |
Channels | Voltage | Option Packages | List Price | Promo Price |
|---|---|---|---|---|---|
|
|
3 | 100 V | Ethernet remote control, wireless LAN remote control, digital I/O trigger | $996 | |
|
|
2 | 120 V | Wireless LAN remote control, digital I/O trigger | $2,996 | |
|
|
2 | 20 V | Wireless LAN remote control, digital I/O trigger, digital voltmeter functionality, battery simulation | $5,652 | |
|
|
4 | 32 V | HMP4040 Base Unit | $1,996 | |
|
|
4 | 64 V | Wireless LAN remote control, Digital trigger I/O, analog input | $4,196 | |
|
|
2 | 100 V |
Max 200V in serial or max 4A in parallel mode, Voltage ripple and noise < 1.5 mV (RMS), < 20 mV (peak-to-peak) (meas.), Current ripple and noise < 500 µA (RMS) (meas.), Rise time < 100 ms, Fall time full load: < 10 ms, no load: < 50 ms, Programming resolution 1 mV / 1 mA, Readback resolution 1 mV / 100 MicroA |
$1,452 | |
|
|
4 | High-precision CW, pulse mode reference source module, power reflection measurements with NRT-Zxx sensors | $8,084 |
Power Analyzer
| Promo Model No. |
Basic Accuracy | Measurement Range | Option Packages | List Price | Promo Price |
|---|---|---|---|---|---|
|
|
0.05% | 50 μW to 12kW | Advanced analysis, advanced I/O, compliance test | $1,996 |
Cable Riders
| Promo Model No. |
Frequency Range | Product Description | List Price | Promo Price |
|---|---|---|---|---|
|
|
4 GHz |
One-port model: DTF, return loss, VSWR and cable loss measurements, Phase noise: –95 dBc (1 Hz), (f = 500 MHz, 30 kHz offset), DANL preamplifier OFF: < –140 dBm, typ. –144 dBm, DANL preamplifier ON: < –156 dBm, typ. –161 dBm, TOI: +10 dBm |
$3,428 | |
|
|
4 GHz |
2-port model: S21 measurements, spectrum and interference analysis, AM/FM/ASK/FSK demodulation, Phase noise: –95 dBc (1 Hz), (f = 500 MHz, 30 kHz offset), DANL preamplifier OFF: < –140 dBm, typ. –144 dBm, DANL preamplifier ON: < –156 dBm, typ. –161 dBm, TOI: +10 dBm |
$6,272 |
Signal Generators
| Promo Model No. |
Frequency Range | Ouput Power | Option Packages | List Price | Promo Price |
|---|---|---|---|---|---|
|
|
9 kHz to 3.2 GHz | > + 13 dBm | OCXO reference oscillator | $6,584 | |
|
|
8 kHz to 3 GHz | > + 13 dBm | Vector Signal Generator | $8,272 |
*For more information please call us at TestEquity (800) 950-3457.
Promo Terms and Conditions
- This offer is good through October 1st – March 31st, 2022.
- This offer is combinable with the EDU discount.
- Rohde & Schwarz reserves the right to cancel this program at any time.
- All other promotions and discounts cannot be combined