Hioki BT3562 Battery Tester

High Precision Lab Battery Testers

• Measure high-voltage battery packs up to 300V (BT3563)
• Testing for production line of high-voltage battery pack and battery module
• Large (low-resistance) cell testing
• Choice of PC interfaces for full remote operation
• 1-Year Warranty

Simultaneous high-speed measurement of internal resistance and battery voltage

The BT3562, BT3563 Battery Testers support simultaneous high-speed measurement of internal resistance (IR) and battery voltage (OCV) for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications.

Basic specifications

Parameters	BT3562	BT3563
Max. applied measurement voltage	±60 V DC rated input voltage ±70 V DC maximum rated voltage above ground	±300 V DC rated input voltage ±300 V DC maximum rated voltage above ground
Resistance Measurement ranges	3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges Accuracy: 30 mΩ to 3000Ω ranges, ±0.5 % rdg. ±5 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM) 3 mΩ range, ±0.5 % rdg. ±10 dgt. (Add ±30 dgt. for EX. FAST, or ±10 dgt. for FAST, or ±5 dgt. for MEDIUM) Testing source frequency: 1kHz ±0.2Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000Ω range) Open-circut Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3Ω to 3000Ω ranges)
Voltage Measurement ranges	DC 6 V (resolution 10 μV) to DC 60 V (resolution 100 μV), 2 ranges	DC 6 V (resolution 10 μV) to DC 300 V (resolution 1 mV), 3 ranges
	Accuracy: ±0.01 % rdg. ±3 dgt. (Add ±3 dgt. for EX. FAST, or ±2 dgt. for FAST and MEDIUM)
Display	31000 full digits (resistance), 600000 full digits (voltage), LED
Sampling rate	Four steps 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow) (Typ., sampling time depends on supply frequency settings and function.)
Measurement time	Response time + sampling rate, approx. 10 ms for measurements (Response time depends on reference values and the measurement object.)
Comparator functions	Setting: Upper and lower limit Output: 3 levels (Hi, In, Lo) or (Pass, Fail), Open-collector (35V, DC 50mA max), Display, Dual audible indicator
Analog Output	Mesured resistance (displayed value, from 0 to 3.1V DC, -01 suffix models only)
Interface	External I/O, RS-232C, Printer (RS-232C), GPIB (-01 suffix models only)
Power supply	100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions, mass	215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
Supplied accessories	Power cord × 1

Please note: Measurement leads are not included.
The male (system side) of the EXT I/O connector is also available. Please inquire.