Low range: 0 to 35 V, 0 to 6 A High range: 0 to 70 V, 0 to 3 A 210 W max., Single output Exceptionally low ripple and noise Front and rear panel output List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function Fast transient response time of ≤ 50 μs Programmable voltage and current slew rates Standard USB interface 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS-485, or RS-232 functionality LabVIEW™ drivers available 3-Year warranty
Outstanding Performance Combined with Unique Features
The 9183 programmable DC power supply delivers up to 210 watts of clean, stable and precise output power due to its exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.
The 9183 offers SCPI IEEE488.2 compliant USB (standard), RS-232, RS-485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows you to configure, control, or monitor basic power supply settings.
In addition to a full numerical keypad for convenient data entry, the 9183 also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.
To protect your DUT (device under test), the 9183 provides safety options such as OVP, OCP, and a key-lock feature to prevent accidental change of parameters that might damage your DUT. Built for reliability, this power supply is also backed by a three-year warranty.
To address the growing LED market, the 9183's design incorporates special LED test modes, which allow for efficient and safe electrical tests of LED panels. Powering LEDs with conventional power supplies will potentially cause permanent damage of the UUT or limit its lifespan due to excessive inrush current at power up and the non-linear characteristics of the LED's I-V curve. The 9183 features three distinct operating modes suitable for LED testing in a manufacturing or R&D environment and other special applications requiring a controlled rise time at power up without generating any inrush current.
Includes: User's manual, AC Power Cord, USB Interface Cable (type A to type B), Line Fuse, Certificate of Calibration and Test Report. Application software and NI certified LabView Drivers are available for download here.