Chroma 62024P-40-120 DC Power Supply

19217.2 MFG #: 62024P-40-120
Product Requires Quote
  • Condition: Used
  • Manufacturer: Chroma

QTY
  • Description

    • 2400W, 0 to 40V, 0 to 120A
    • Digital encoder knobs, keypad and function keys
    • Power Factor Correction (0.95)
    • High-speed Programming
    • Precision Voltage and Current Measurements
    • Current sharing for parallel operation with Master/Slave Control
    • Voltage ramp function: Time Range (10ms to 99 hours)
    • Auto Sequencing Programming: 10 Programs /100 Sequences / 8-bit TTL
    • Voltage & Current Slew Rate Control
    • OVP, Current Limit, Thermal protection
    • Remote sense, 5V line loss compensation
    • APG (Analog Programmable Interface) with Isolated Analog Interface Card
    • Standard RS-232 and USB interface
    • Optional GPIB interface
    • Optional Ethernet interface

    SPECIAL ORDER ITEM - NON-CANCELLABLE, NON-RETURNABLE

    The Chroma 62024P-40-120 programmable DC power supply offers many unique advantages for ATE integration and testing. These advantage include a constant power operating envelope, precision readback of output current and voltage output trigger signals, as well as the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 62024P-40-120 sets a new standard for high accuracy programmable DC supplies.

    The 62024P-40-120 is rated at 1,200 - 2,400 Watts, 120 Amps and 40 Volts. Due to its constant power operating envelope, it can provide both high voltage/low current AND low voltage/high current — thereby reducing the number of supplies needed in typical ATE applications.

    Master/Slave Parallel & Serial Control
    When high power is required, it is common to connect two or more power supplies in parallel or series. The 62024P-40-120 has a smart Master / Slave control mode making series/parallel operation fast and simple. In this mode the master scales values and downloads data to slave units so programming is simple and current sharing is automatic.
    62000P Master/Slave Parallel & Serial Control

    Programming Sequences Applications
    The 62024P-40-120 allows for 100 user programmable sequences with time settings ranging from 5ms to 15000s, voltage /current slew rate control and 8 bit TTL output for automated test applications. Applications include DC/DC Converter & Inverter voltage dropout testing, engine start-up simulation, battery automated charging, product life cycle testing and airborne avionics testing.

    62024P-40-120 Current GraphWide Operating Region With Constant Power
    The 62024P-40-120 power supply offers a wide operating region. For example, its specification are 40 V, 120 A, or 1,200 to 2,400 W maximum. This allows operating flexibly in various combinations as shown in the figure to the right.

    Conventional power supplies provide the same rated current at all output voltages, however, the 62024P-40-120 provides greater current at lower output voltages. This means both low voltage/high current and high voltage/low current UUTs can be tested using a single supply avoiding the need for multiple supplies. * The green area is over specification due to low voltage (<22V) & high current output (>110A). The following is operation power envelope: 10V/120A, 11V/110A, 15V/110A, 20V/110A, 22V/109A, 24V/100A, 30V/80A, 40V/60A.

    NOTE: The power rating determines the maximum available current for a given voltage output. The max. power limit of 2400W is under output voltage 22V - 40V, and see the diagram above for operating power envelope.

    Please visit the Chroma 62000P Series product page for information on all programmable DC Power Supplies in this series. >>