Chroma 63205 DC Electronic Load

15350.2 MFG #: 63205
Product Requires Quote

QTY
  • Description

Product Features

    Power: 2600W, 5200W, 6500W, 10000W, 10400W, 14500W, 15600W Voltage range: 0 to 80V / 0 to 600V / 0 to 1,000V Current range: Up to 1000A CC, CR, CV, CP, Dynamic load modes Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW) Dynamic loading: Up to 20kHz Only need 1V to draw rated current Programmable slew rate, up to 41A/µS Measurement: Voltage / Current / Power / Resistance Large LED / LCD display External loading waveform simulation Short circuit simulation and short circuit current measurement Full protection: OP, OC, OV, OT and reverse protection Versatile remote controller GPIB & RS-232 interface Surge load capability Battery discharge timer

    Programmable High Power DC Electronic Load
    The Chroma 63200 Series Electronic Loads are designed to test DC power sources, power electronic devices, automotive battery and components testing. The high power ratings, parallel and synchronization capabilities make them the ideal tool for testing high power UUTs such as SMRs, UPSs, batteries, and fuel cells.

    Power Electronic Devices Testing
    The 63200 series offers 11 different models with power range from 2600 watts to 15600 watts, current from 50A to 1000A and up to 600V input voltage. The 4 load modes setup provide different load simulations for various application occasions. The CC/CR modes are designed to test constant voltage type of power supply. CV mode is used to test battery charger and current source, while CP mode is ideal for battery testing by simulating the real discharge curve.

    Battery testing
    The 63200 series can draw its rated current under very low voltage (1V typical) even under the highest specified slew rate. This unique feature guarantees the best loading performance to a low voltage power supply. With the unique external waveform simulation and Master / Slave control capability, the 63200 series electronic loads allow users to parallel and synchronize more than one load together using an internal or external loading control signal. This feature provides unlimited load simulation and the possibility of power expansion.

    Master / Slave Parallel Control
    63200 Series DC Electronic Loads Master / Slave
    The 63200 series high power loads have smart Master / Slave control mode. When the loads are set to Master / Slave mode, users can program the loading (CC mode only) on master unit. The loading current values of the slave units will be calculated and downloaded by master unit automatically. In short, unlike traditional designs, users may consider several load units that work under Master / Slave mode as a single load unit.

    External Loading Waveform Simulation
    63200 Series DC Electronic Loads Waveform The 63200 series electronic loads can be controlled by an external analog control signal, which is generated by any kind of signals or an arbitrary waveform generator. Thus, it is capable of simulating any loading waveform observed in the field within the load specifications.


    Short Circuit Simulation
    Chroma's 63200 Series electronic loads can also simulate a short circuit condition. The load can short a DC power source or any power supplies that have a built in current limit function, and measure their short circuit currents so that users can verify if the UUT current limit is functional.

    Surge Load Capability
    Chroma's 63200 Series DC Loads provide a unique surge load simulation capability which allows users to overdrive the loads up to 2.7 times their rated power for short periods. This feature is ideal when the average power required by the UUT is low compared to short-term peak power demands. Plasma Display Panel (PDPs) testing is one of the typical applications, others include battery 3C discharge, breaker & fuse over rating (300% to 1000%) tests, car engine start-up simulation and DC motor start-up simulation.

    Timer Function for Battery Discharge Testing
    The 63200 Loads include a unique timing & measurement function allowing for precision time settings and measurements in the range of 1s to 99999s. This feature allows users to set a final voltage & timeout value for battery discharge testing and similar applications.

    Power Supply Testing
    Power supplies have played a critical role in electrical and electronic devices. They have diversified into several different configurations for different applications. For example, AC/AC power supplies are used for UPS and AVR, AC/DC power supplies are used for PC power supplies, and DC/AC power supplies are used for inverters that transfer battery power to AC for home appliances. Lastly, DC/DC converters are widely used in battery powered devices such as cellular phones and laptop computers. With four different load modes, Chroma 63200 series electronic loads are capable of testing many different DC output power supplies directly or via a rectifier. They can also be used to test the AC output power supplies.

    Electronic & Electrical Devices Testing
    Almost all modern electronic equipment have a built in power supply. Therefore, a DC electronic load is an important instrument for these devices during the R/D and Q/A phases. For example, A/D, D/D and D/A stages are normally integrated in a UPS. The Chroma 63200 electronic loads are helpful in testing the internal A/D and D/D boards of UPSs

    System Integration
    Chroma's 63200 series electronic loads provide GPIB, RS-232C and RS-485 PC controllable interfaces. The external waveform simulation and voltage / current monitoring capability make Chroma 63200 family ideal for automatic system integration.

    Note: Models 63208, 63209, and 63210: Loads are installed in their own cabinet. No rack kit.

    Chroma 63200 Series Electronic Loads

    Max. Power Model Specifications
    2.6 kW 63201 300 A/80 V/2.6 kW
    63202 50 A/600 V/2.6 kW
    5.2 kW 63203 600 A/80 V/5.2 kW
    63204-600 100 A/600 V/5.2 kW
    6.5 kW 63205 180 A/80 V/6.5 kW
    10.4 kW 63206 600 A/80 V/10.4 kW
    63207 300 A/80 V/10.4 kW
    15.6 kW 63208 600 A/80 V/15.6 kW
    63209 1000 A/80 V/15.6 kW
    14.5 kW 63210 150 A/500 V/14.5 kW
    15.6 kW 63211 150 A/1000 V/15.6 kW
    10 kW 63212 150 A/1000V/10 kW