Keithley 2260B-250-9 Programmable DC Power Supply

24548.1 MFG #: 2260B-250-9
$0.00 / EA
  • Condition: New
  • Family Models: 2260B-250-9
  • Manufacturer: Keithley

QTY
  • Description

    • 360 W, 720 W and 1080 W versions with voltage to 800 V and current to 108 A
      (NOTE: V * A output cannot exceed the power rating)
    • Programmable voltage or current rise and fall times from 0.1 V/s to 1600 V/s or 0.001A/s to 216 A/s
    • Constant current priority setting reduces voltage and current overshoot when powering LEDs
    • Programmable output resistance simulates battery output
    • Can display output current or output voltage
    • USB, LAN standard, GPIB optional
    • Fit six 71mm wide 360W units or three 142mm wide 720W units; or two 214mm wide 1080W units in a standard rack width to minimize bench and test system space
    • Three-year warranty
    NOTE: V * A output cannot exceed the power rating

    360 Watt, 720 Watt and 1080 Watt Programmable DC Power Supplies
    Source a wide range of voltages and currents with the Series 2260B Programmable DC Power Supplies. Choose from 12 versions with voltage output of 30V, 80V, 250V or 800V. The 360W versions can output current of 36A, 13.5A, 4.5A, or 1.44A; the 720W models can output 72A, 27A, 9A, or 2.88A; and the 1080W instruments can output 108A, 40.5A, 13.5A or 4.32A. This wide range of output voltages and current, combined with multiple interface choices, makes the Series 2260B ideal for use in a wide range of applications, including research and design, quality control, and production test.

    Flexible and Fast for Automated Test Systems
    The Series 2260B power supplies will work in any automated system because they can interface to a controller with either a USB, LAN, or optional GPIB interface. Furthermore, the Series 2260B supplies have fast discharge capability to dissipate the voltage on the output quickly. These supplies also have a fast (1ms) transient recovery time to load changes. The combination of the fast discharge time and the fast transient response helps minimize critical test time in automated test systems.

    Control the Voltage or Current Rise Time to Reduce Inrush Current and Prevent Device Damage
    Series 2260B power supplies have programmable rise time (or slew rate) control to prevent potentially dangerous inrush currents from flowing into loads that have low resistance when power is initially supplied. Either voltage or current rise time can be controlled. With voltage slew rate control, voltage rise time can range from a slow, 0.1V/s to a high speed of 1600V/s for the 800V supplies. When operating under constant current control, output current rise time can be programmed from a low slew rate of 0.001A/s to a maximum value of 216A/s for the Model 2260B-30-108. Programming a current rise time puts the Series 2260B power supplies in a constant current control priority mode in which the current slew rate limits the rate at which the voltage rises across the device under test (DUT.) In addition to controlling rise time, fall time can also be programmed; fall time values can be different from rise time values. Delivery of power to a load can be precisely controlled to prevent overshoot spikes and excessive amounts of inrush current, eliminating damage to components, modules, or devices and generating more precise characteristic I-V curves for components such as LEDs.

    Emulate the Response of a Battery
    Test a circuit or device under the most realistic conditions by applying a test source with the output resistance that is equivalent to the output resistance of the actual source that will be used to power the circuit or device. For example, a battery has a varying internal resistance, and a device powered by a battery will have a voltage applied to the device that is reduced by the voltage drop across the battery's internal resistance. Versions of the Series 2260B power supplies can have an internal resistance up to 555O to simulate a wide range of battery chemistries and load conditions.

    Create Custom Voltage Source Waveforms
    An internal test sequence mode allows the Series 2260B supplies to output a set of voltage levels for varying time intervals at each level. The test sequence can be stored and used repeatedly to determine DUT performance at number of voltage levels. In addition, the analog input control can be used to create voltage profiles that simulate how a battery responds to a fast changing load current requirement such as a large inrush current. Also, generate a combined DC output level with an AC signal superimposed on it to test how a circuit responds to noise on its DC power source. The analog input control parameter can be either a voltage input or a resistance input. With this analog control capability, numerous types of DC supply signals can be generated to test circuits and devices under a wide range of circumstances.

    Flexible and Fast for Automated Test Systems
    With their USB, LAN, or optional GPIB interfaces, Series 2260B power supplies will work in any automated system. In addition, these power supplies have an analog control capability that can control outputs via an external voltage and resistance. Furthermore, Series 2260B power supplies feature fast discharge capability to quickly dissipate the voltage on the output. These power supplies also have a fast, 1ms transient recovery time to load changes. This combination of fast discharge time and fast transient response minimizes critical test time in automated test systems.

    Keithley Programmable DC Power Supplies
    A signal generator (top plot) controls the 2260B to create a complex DC supply waveform (bottom plot) that simulates both a voltage drop due to a large inrush current and noise on the DC supply line.
    360 Watts 2260B-30-36 2260B-80-13 2260B-250-4 2260B-800-1
    Voltage 0 – 30 V 0 – 80 V 0 – 250 V 0 – 800 V
    Current 0 – 36 A 0 – 13.5 A 0 – 4.5 A 0 – 1.44 A
    720 Watts 2260B-30-72 2260B-80-27 2260B-250-9 2260B-800-2
    Voltage 0 – 30 V 0 – 80 V 0 – 250 V 0 – 800 V
    Current 0 – 72 A 0 – 27 A 0 – 9 A 0 – 2.88 A
    1080 Watts 2260B-30-108 2260B-80-40 2260B-250-13 2260B-800-4
    Voltage 0 – 30 V 0 – 80 V 0 – 250 V 0 – 800 V
    Current 0 – 108 A 0 – 40.5 A 0 – 13.5 A 0 – 4.32 A

    Please refer to Data Sheet for complete specifications.

    Includes: 2260B Basic Accessory Kit (for 36V and 80V models), 2260B-010 Basic Accessories Kit (for 250V/800V Series), Quick Start Guide Documentation CD with Manuals and Software Drivers, Test Lead Set (for 36V and 80V models), 2260-009 Test Lead (for 250V/800V models), USB Cable, Power Cord and Certificate of Traceable Calibration.