Keysight 66111A Fast Transient DC Source

15214.1 MFG #: 66111A
Product Requires Quote
  • Amps: 3
  • Condition: Used
  • Manufacturer: Keysight
  • Volts: 15
  • Watts: 45

QTY
  • Description

    5 A peak current sourcing for next generation data transmission formats Excellent transient voltage response characteristics prevents test interruptions due to triggering low voltage phone shutdown Up to 2.8 A current sinking to test built-in battery chargers Fast transient response, rapid command processing, and high speed output programming time maximize manufacturing test throughput Low power supply output noise assures less interference with phone operations Automatically detects open sense wire connections Ensures correct calibration of charger circuitry Avoids low voltage shutdown

    The Keysight 66111A fast transient DC source is a low cost solution that delivers high throughput and exceptional sourcing capabilities. The 66111A is ideal for applications that do not require the dynamic and microamp measurement capabilities of a 66311B power supply. The 66111A also has a Keysight proprietary feature that helps test engineers avoid improper remote voltage settings and guarantees correct calibration of charger circuitry of the device under test.

    66111A Specifications
    Number of Outputs 1
    Output Ratings
    (0-55°C)
    0-15 V, 0-3 A
    Peak current for up to 7 ms: 5A
    Programming Accuracy
    (25°C ± 5°C)
    0.05% + 10 mV
    0.05% + 1.33 A
    Ripple and Noise (in the range of 20 Hz to 20 MHz, with outputs ungrounded or with either terminal grounded) Voltage (rms/p-p) Normal Mode: 1 mV/6 mV
    Current (rms): 2 mA
    DC Measurement Accuracy (via GPIB or front panel meters with respect to actual output at 25°C ± 5°C ) Voltage: 0.03% + 5 mV
    (+20 mA to +rated I): 0.2% + 9 mA
    (-20 mA to -rated I): 0.2% + 9 mA
    Load Regulation Voltage: 2 mV
    Current: 0.75 mA
    Line Regulation Voltage: 0.5 mV
    Current: 0.75 mA
    Transient Response Time (for output to recover to within 20 mV of final value after 0.1 to 1.5 A load change in high mode compensation range) < 35 us
    Supplemental Characteristics
    Average Programming Resolution Voltage: 3.75 mV
    Current: 0.67 mA
    Sink current -2 A @ 7.5 V
    Transient Voltage Dip (typical with up to 15 feet 22 AWG wiring) 70 mV
    DC Floating Voltage Output terminals can be floated up to ±50 VDC maximum from chassis ground.
    Remote Sensing Up to 4 volts can be dropped in each load lead. Add 2 mV to the voltage load regulation specification for each 1 volt change (in the positive output lead) due to load current change
    Command Processing Time Average time required for the output voltage to begin to change following receipt of digital data is 4 ms for power supplies connected directly to the GPIB.
    Output Programming Response Time The rise and fall time (10/90% and 90/10%) of the output voltage is less than 200 us.
    Output Voltage Settling Time The output voltage change settles within 1 LSB (0.025% X rated voltage) of final value in 2 ms.
    Measurement Time Average time to make a voltage or current measurement is 50 ms.
    GPIB Interface Capabilities IEEE 488.2, SCPI command set and Keysight 6630A Series programming compatibility.
    Input Power (full load): 47-63 Hz 115 VAC mains (104-127 Vac): 1.4 A, 100 W
    Regulatory Compliance Listed to UL 3111-1, certified to CSA C22.2 no. 1010.1-92; conforms to EN61010-1; conforms to IEC 1010-1, complies with European EMC and Low Voltage directives, carries the CE mark. Also complies with the Australian EMC requirements and carries the C-tick mark.
    Physical Specifications
    Weight 8.85 kg (19.5 lb) net
    11.1 kg (24.5 lb) shipping
    Size 88.1 mm H x 212.8 mm W x 444.4 mm D (3.5 in x 8.4 in x 17.5 in )