Operates with the EPM-P series and P-Series power meters 300 kHz, 1.5 MHz and 5 MHz video (modulation) bandwidths Provides peak and average power measurements Calibration factors stored in EEPROM Fast measurement speed over the GPIB (up to 1,000 readings per second) Two frequency ranges: 50 MHz to 6 GHz, and 50 MHz to 18 GHz Wide dynamic range sensors
The E9320 Series power sensors must be used with an E9288A, B, or C sensor cable and only operate with the EPM-P series power meters (E4416A and E4417A). These sensors have two measurement paths, one for peak and time-gated measurements (a fast sampled path) and another for stable, low-level average power measurements.
The E9320 Series sensors have two frequency ranges, from 50 MHz to 6 GHz to cover most wireless communications applications, and a higher frequency range 50 MHz to 18 GHz. Using just one sensor, you can measure W-CDMA, CDMA and TDMA as each sensor provides a medium and low modulation bandwidth setting, selectable by the meter. You can select modulation bandwidth required for their application, while maintaining the maximum dynamic range. Each frequency range has a choice of 3 different modulation bandwidth sensors:
- 300 kHz for TDMA signals, for example GSM.
- 1.5 MHz for CDMA
- 5 MHz for W-CDMA