- 1, 2.5, 4, 6 GHz bandwidth (upgradable)
- 20 GSa/s sampling rate
- 2 or 4 Analog channels plus 16 Digital Channels (MSO6002A, MSO6004A)
- > 450,000 wfms/sec update rate
- Max memory depth: 4 Mpts
- 12.1-inch capacitive multi-touch screen with InfiniiScan Zone touch trigger
- Industry-leading noise floor and waveform update rate
- Standard histogram and color grade, plus enhanced color FFT
- Optional jitter and real-time eye diagram analysis
- The power of 6 integrated instruments in 1, fully upgradable: Oscilloscope, 16 digital channels, serial protocol trigger and decode (option), dual-channel function/arbitrary waveform generator (option), 3-digit digital voltmeter (option), 10-digit counter and totalizer (option)
- Voice control in 14 languages
- Three-year warranty
The New Bandwidth Standard: Capture higher-frequency waveforms
The IniniiVision 6000 X-Series oscilloscopes are designed for the most demanding engineers who want bandwidth, visualization power and the flexibility that comes with integrated capabilities, in a portable package with a familiar embedded OS user interface — all at an affordable price. The IniniiVision 6000 X-Series delivers to 6 GHz bandwidth and a 20-GSa/s sampling rate so you can confidently measure signals with rise times faster than 150 ps or signals with higher than 2 Gbps NRZ (non-return to zero) data signal rates.
New visualization standard: Isolate waveforms of interest
Additionally, the 6000 X-Series set the new visualization standard with an industry-leading 450,000 waveforms-per-second update rate that lets you see more of your signal behavior so you have more confidence in your design. Standard segmented memory turns the oscilloscope into an effective ultra-deep memory capture tool.
Portability and a familiar embedded OS user interface
With the industry's largest 12.1-inch capacitive touch screen with multi-touch and voice control, you may be surprised just how easy it is to use the InfiniiVision 6000 X-Series. It is "designed for touch," so you spend less time setting up your scope and more time designing and testing. And capabilities such as the innovative InfiniiScan Zone touch trigger let you simply draw a box around the signals of interest, and the scope creates the trigger for you.
MSO with N2756A Digital Cable
Integrate a digital bus: Optional mixed signal oscilloscope (MSO models)
With an additional optional 16 integrated digital channels (Option DSOX6MSO) probed by a newly designed digital channel cable, you now have up to 20 channels of time-correlated triggering, acquisition, and viewing on the same instrument. This capability is especially important in today's embedded designs with sophisticated digital control circuitry.
|2||4||2 + 16||4 + 16|
|1 GHz||2.5 GHz||4 GHz||6 GHz|
|For 2 channel models||Default||DSOX6B10T252BW||DSOX6B10T402BW||DSOX6B10T602BW|
|For 4 channel modes||Default||DSOX6B10T254BW||DSOX6B10T404BW||DSOX6B10T604BW|
Sample model configurations
- 1 GHz, 4 + 16 channel: MSOX6004A only
- 4 GHz, 4 + 16 channel: MSOX6004A and DSOX6B10T404BW
Frequency Response Analysis (FRA)
FRA is a critical measurement used to characterize the frequency response (gain and phase versus frequency) of a variety of today's electronic designs including passive filters, amplifier circuits and negative feedback networks of switch mode power supplies (loop response). While network analyzers or standalone low-frequency FRAs are typically used to perform these types of measurements, however, now automatic frequency response analysis is now available in Keysight's InfiniiVision 6000 X-Series oscilloscopes with option DSOX6FRA.
DSOX6NRZ user-definable Manchester/NRZ trigger and decode software
DSOX6NRZ can be customized to support a broad range of serial protocols, including the PSI5 automotive sensor bus and NFC-F. This option automatically demodulates near field communication RF signals (13.56 MHz carrier) at 212 kbps and 424 kbps (NFC-F).
Keysight BenchVue Software for the PC
This software option from Keysight offers engineers and technicians involved in design and validation an easy and intuitive way to accelerate testing with no programming necessary. Multiple instrument measurement visibility and data capture improves the way users interact with their instruments and the entire bench. BenchVue provides easy viewing, capturing and exporting of data and screen shots. Visit the BenchVue Product Page for more information including instrument compatibility.
Included: Certificate of calibration (2-year calibration interval), N2894A 700-MHz 10:1 passive probe (one per channel), N2756A 16-digital-channel MSO cable (MSO models), multi-language support interface, voice control support, power cord, front panel protective cover, and user's guide, service guide, and programmer's manual on CD.
MATLAB software is available directly from Keysight for making your own custom measurement and analysis routines, user-defined filters or instrument applications.
A BenchVue software license (BV0004B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences.