Wide bandwidth: DC to 100 MHz High S/N ratio, low current measurement capability 15 A peak, 15 ADC, 10 Arms continuous, 30 A peak non-continuous* Easy protect function at excessive input Auto demagnetization (degauss) and calibration removes any residual magnetism and unwanted DC offset in the probe Compatible with high impedance AutoProbe interfaceThe Keysight N2893A is a 100 MHz bandwidth, active current probe for InfiniiVision and Infiniium oscilloscopes. The probe features flat bandwidth (DC-100 MHz), low noise(<2.5 mA rms) and low circuit insertion loss. Auto demagnetization (degauss) and calibration removes any residual magnetism and unwanted DC offset in the probe. The probe is powered directly by the InfiniiVision and Infiniium Autoprobe interface, eliminating the need for an additional power supply. The N2893A is ideal for capturing transient current signals such as those found in motor controllers, in switching power supplies, inverters and current amplifiers driving inductive loads. *When only ONE of these probes are used on an InfiniiVision AutoProbe interface scope (3000 X-Series, 5000 Series, 6000 Series, and 7000 Series), the maximum input specification is 30 A peak (DC + ACpeak). When using 2 or more probes on InfiniiVision scopes, or when using 1 or more probes on an Infiniium scope, the maximum input specification remains at 15 A peak (DC + ACpeak).