- Model ALx1.25-200-300: Max Power 1.25 kW; Max Voltage 200VDC; Max Current: 300ADC
- MagnaLINK™ Distributed DSP Architecture
- 16-bit digital programming and monitoring resolution
- Many control modes, including: voltage, current, power, resistance
- Wide voltage-current-power operating profile
- Integrated front and rear full control (host) USB ports, RS-485, and dual MagnaLINK™ ports.
- Optional LXI TCP/IP Ethernet and GPIB interfaces
- Digital master-slaving capability
- Integrated arbitrary waveforms with up to 100 steps per stored function
- Configurable external analog-digital user I/O
- Designed and manufactured in the USA
Wide Full Power Operating Range
The ALx Series utilizes conventional linear MOSFET-based dissipative elements, allowing the series to achieve a very wide voltage-current operating range within the model's maximum power rating. Using the same heat management innovations developed for Magna-Power's high density programmable DC power supplies, the ALx Series' conservative cooling ensures long product life in environments up to 50°C ambient operating temperature.
MagnaLINK™ Distributed DSP Architecture
Magna-Power's MagnaLINK™ technology provides distributed Texas Instrument DSP control across power processing stages inside the MagnaLOAD DC electronic load. This technology follows a significant internal development cycle from Magna-Power to provide a unified digital control platform across its electronic loads and power supplies, featuring fully digital control loops, adjustable control gains, programmable slew rates, function generation, and many new advanced control technologies.
Many Control Modes
To accommodate a variety of DC sources, all ALx Series MagnaLOADs come with several distinct control modes, including: Voltage Mode, Current Mode, Power Mode, Resistance Mode, and Shunt Regulator Mode. Preference for DC regulation is given to the parameter in the selected mode within the programmed set-points. Using the MagnaLOAD's set-points and trip settings, the product can configured to either trip with a fault when a limit is exceeded or to cross-over into a different regulation state.
Digital Master-Slaving: Expandibility Without Compromise (This is planned feature, and will be available via a future firmware update.)
All MagnaLOADs come standard with a MagnaLINK™ Input and a MagnaLINK™ Output port, which provides plug and play digital master-slaving. Simply connect the master's MagnaLINK™ Output to the slave's MagnaLINK™ Input and the MagnaLOADs will automatically configure themselves for master-slave operation based on the populated ports. Buffered digital MagnaLINK™ connections means many MagnaLOADs can be daisy-chained in master-slave operation.
The internal MagnaLINK™ protocol was developed with expandability at the forefront. When configured for master-slave operation, the master controller takes control of all the slave's digital "targets." With this digital master-slaving strategy, it is completely transparent whether the unit is operating as a stand-alone product or in master-slave.
Integrated Arbitrary Waveform Generation (This is planned feature, and will be available via a future firmware update.)
All MagnaLOADs provide four user programmable arbitrary waveforms. Each arbitrary waveform can consists of up to 1024 points, each point with the following settings:
- Voltage, Current, Power, and Resistance Set Points
- Time Period Rise and Fall Slew Rates
- Stop, Loop, or Jump-to-Point Setting
With the integrated arbitrary waveform generation, the MagnaLOAD can easily be used to provide a wide range of user-generated waveforms including step load transitions or pulsed DC loading.
MagnaWEB Software Interface
Magna-Power's next generation software interface, MagnaWEB, provides intuitive and user-friendly web-browser based controls for programming and measurement read-back of the MagnaLOAD's activity. Virtually all of the MagnaLOAD's available functions can be controlled and monitored from the MagnaWEB software over any of product's installed communication interfaces.
MagnaWEB uses a server-client software model to provide access to the MagnaLOAD from nearly any device and operating system. Install and run the MagnaWEB software locally on Windows, OSX or Linux and, using a web browser, access the server connected to the MagnaLOAD from a variety of devices including other desktops, tablets or smart-phones.
Extensive Programming Support
All ALx Series MagnaLOADs come with a dedicated National Instruments LabVIEW™ driver, Interchangeable Virtual Instrument (IVI) driver, and support for a wide range of Standard Commands for Programmable Instrumentation (SCPI). These programming interfaces support full control, measurement, and monitoring of the MagnaLOAD. All of the MagnaLOAD's available communication interfaces are supported by these drivers and command sets, including: USB, RS485, LXI TCP/IP Ethernet, and IEEE-488 GPIB.
Shunt Regulator Mode turns the MagnaLOAD into a high-speed smart braking resistor, engaging the DC input only when a specified voltage and exceeded by a user-defined percentage, while limiting the shunt current to a programmed set-point.
Configurable External User I/O
Beyond the front panel and computer controls, all MagnaLOADs come standard with a 25-pin D-Sub completely-configurable connector designated as the External User I/O. This connector provides:
| || |
ALx Series Air-Cooled Linear DC Electronic Load Models
There are many possible configurations for the ALx Series product. Use the ordering guide and models chart to the right to define the best model for your application.
Note: The power rating determines the maximum available current for a given voltage output. For example, the ALx1.25-200-300 is rated as 200 V, 300 A, or 1250 W, but you cannot get 200 V and 300 A simultaneously. The maximum current at 200 V is 6.25 A (200 V x 6.25 A = 1250 W).
All models are "Rack Mount" (3U) package type. HWD: 5-1/4" x 19" x 24" (13.34 cm x 48.26 cm x 60.96 cm)
CLICK HERE to view the Magna Power ALx Series Family Page