Rohde & Schwarz HMP4040 (3629.6776.04) DC Power Supply

27148.1 MFG #: HMP4040 (3629.6776.04)
$0.00 / EA

QTY
  • Description

Product Features

    This Changes Everything bundled Options Promo
    Through 12/31/19 Get RTB2004 Instrument and Selected Options.
    Get all info HERE | Savings up to: $2485


    Flyer Here


    Bundled Options included in this Promo:

    • 4 each 0 to 32 V, 0 to 10 A (not to exceed 160 W per output)
    • 384 W Output Power realized by intelligent Power Management
    • Linear Post Regulators for low ripple
    • High Setting- and Read-Back Resolution of 1mV up to 0.2mA
    • Keypad for direct Parameter Entry
    • Galvanically isolated, earth-free and short circuit protected Outputs
    • Advanced Parallel- and Serial Operation via V/I Tracking
    • EasyArb Function for free definable V/I Characteristics
    • FuseLink: Individual Channel Combination of Electronic Fuses
    • Free adjustable Overvoltage Protection (OVP) for all Outputs
    • All Parameters clearly displayed via LCD/Illuminated Buttons
    • Rear Connectors for all Channels including Sense
    • USB/LAN Interface is included (HO732), optional RS-232/USB (HO720) or GPIB (HO740)
    • CSA Safety Certified for USA (UL) and Canada (CSA)
    • Three-year warranty

    Parallel Operation Mode
    In the parallel operation mode you can bundle the channels to achieve higher currents. The integrated power management function also ensures an intelligent power distribution over each channel in this operation mode.

    Serial Operation Mode
    In the serial operation mode you can combine the channels for a maximum of up to 120 volt. The V/I tracking function of the instrument is also available in this operation mode.

    Industrial Production Environment
    Power supply units in industrial production environment are often found in 19" racks. The HMP4040 utilizes a 19" 4 RU rack with the HZP91 rack mounting kit. Additionally, all front panel connectors, including SENSE lines, are also located at the back panel of the instrument.

    Remote Control Interface
    USB/LAN interface (HO732) is included. RS-232/USB (HO720) and GPIB (HO740) are available as options to replace the built-in standard interface. All interfaces can be installed by the user without opening the instrument.

    4-channels; 0 to 32 V all channels.
    Each channel: 0 to 10 A (each output cannot exceed 160 W)
    HMP4040 total maximum power output: 384 Watts

    NOTE: YOU CANNOT ACHIEVE 32 V AND 10 A SIMULTANEOUSLY SINCE THE MAXIMUM RATING PER OUTPUT IS 160 WATTS!

    Included: power cord, operating manual, and software CD.