More speed. Lowest noise. Exceptional measurement confidence.
With the lowest input noise and up to 8 GHz analog bandwidth, the 6 Series MSO provides excellent signal fidelity for analyzing and debugging today's embedded systems. The remarkably innovative pinch-swipe-zoom touchscreen user interface coupled with the industry's largest high definition display and 4 FlexChannel® inputs that let you measure one analog or eight digital signals per channel, the 6 Series MSO is ready for today's toughest challenges and tomorrow's too. The 6 Series MSO offers a new level of integration of digital channels. Digital channels share the same high sample rate (up to 25 GS/s) for fine timing resolution, and long record length (up to 250 Mpoints) for long time captures as analog channels without the usual tradeoffs: digital channels having lower sample rates or shorter record lengths than analog channels.
Saves Embedded Systems Designers Time, Protects Investments
The new 6 Series MSO extends the performance threshold of midrange oscilloscopes to 8 GHz and delivers a 25 GS/s sample rate simultaneously on all 4 channels. The MSO64 also boosts measurement confidence with its low-noise inputs especially at the highest sensitivity settings where it matters most. For example, modern embedded designs require clean, precisely-controlled DC power supplies to feed ASIC and FPGA devices. For such applications, the 6 Series MSO enables designers to measure DC power rails with more resolution and accuracy, reducing the time it takes to understand high frequency influencers on power rails in a design.
|FlexChannels provide one analog signal input or eight digital logic inputs with the TLP058 probe.|
New levels of signal detail
To meet the need for more insight on faster signals, the 6 Series MSO incorporates a new low-noise preamplifier ASIC, the TEK061, that dramatically lowers noise, especially on signals that are in the hundreds of millivolts peak-to-peak. With its 25 GS/s sample rate on four channels, the instrument delivers 16-bit resolution at 200 MHz when using the High Res mode. This means that not only can you see the interfering signals on their power rail, but you'll measure them with a level of accuracy, that until now has not been possible on a scope.
FlexChannel® technology enables maximum flexibility and broader system visibility
The 6 Series MSO redefines what a Mixed Signal Oscilloscope (MSO) should be. FlexChannel technology enables each of the inputs on the instrument to be used as a single analog channel or eight digital channels. The conversion is done by simply attaching a TLP058 logic probe to any input. Imagine the flexibility and configurability this provides. You can change the configuration at any time by simply adding or removing TLP058 logic probes, so you always have the right number of digital channels. You can connect as many TLP058 probes as you like, enabling up to a maximum of 32 digital channels.
Unprecedented signal viewing capability
The stunning 15.6" (396 mm) display in the 6 Series MSO is the largest display in the industry. It is also the highest resolution display, with full HD resolution (1,920 x 1,080), enabling you to see many signals at once with ample room for critical readouts and analysis. The viewing area is optimized to ensure that the maximum vertical space is available for waveforms. And it employs the touch interactions that you use with phones and tablets, and expect in a touch enabled device:
- Drag waveforms left/right or up/down to adjust horizontal and vertical position or to pan a zoomed view
- Pinch and expand to change scale or zoom in/out in either horizontal or vertical directions
- Drag items to the trash can to delete them
- Swipe in from the right to reveal the Results Bar or down from the top to access the menus in the upper left corner of the display
Digital Voltmeter (DVM) and Trigger Frequency Counter
The 6 Series MSO contains an integrated 4-digit digital voltmeter (DVM) and 8-digit trigger frequency counter. Any of the analog inputs can be a source for the voltmeter, using the same probes that are already attached for general oscilloscope usage. The counter provides a very precise readout of the frequency of the trigger event on which you're triggering. Both the DVM and trigger frequency counter are available for free and are activated when you register your product.
New high-performance probe options
For easier connection to fast signals, Tektronix offers a series of high-performance probes that are well-suited to the performance levels of the 6 Series MSO. The TDP7700 is a series of TriMode™ probes with bandwidths of 4, 6 or 8 GHz. TriMode probes enables you to make the single-ended, differential, and common mode signal measurements required for high-speed bus analysis, without moving or changing probes. These probes use the TekFlex™ connector technology which places active buffers at the probe tip for the best signal fidelity while limiting mechanical stress on tiny test points and supports a variety of connectivity methods to the device under test including solder-in tips, direct connection and handheld browsing. Additionally, the TAP4000 and TDP4000 probes extend the range of Tektronix' popular active, single-ended and differential probes, respectively, and now support up to 4 GHz bandwidth.
Windows or not — you choose
The 6 Series MSO offers you the choice of whether to include a Microsoft Windows™ operating system. Opening an access panel on the bottom of the instrument reveals a connection for a solid state drive (SSD). When the SSD is not present, the instrument boots as a dedicated scope with no ability to run or install other programs.
Help when you need it
The 6 Series MSO includes several helpful resources so you can get your questions answered rapidly without having to find a manual or go to a website:
- Graphical images and explanatory text are used in numerous menus to provide quick feature overviews
- All menus include a question mark icon in the upper right that takes you directly to the portion of the integrated help system that applies to that menu
- A short user interface tutorial is included in the Help menu for new users to come up to speed on the instrument in a matter of a few minutes
Included with Tektronix MSO64: Four (4) TPP1000 1 GHz, low-C passive probes w/ one-year warranty, mouse, power cord and front cover with attached accessory pouch, printed Installation Manual covers safety and basic operation, comprehensive integrated online help and certificate of traceability.
To 8 GHz Bandwidth and 25 GS/s Sample Rate Simultaneously on all 4 Channels
- Bandwidth: 1 GHz, upgradeable to 2.5 GHz, 4 GHz, 6 GHz, 8 GHz
- capacitive pinch-zoom-swipe 15.6-inch touchscreen
- 25 GS/s Real-Time Sample Rate on four channels (Interpolated: 2.5 TS/s)
- Standard Record Length: 62.5 Mpoints (125 Mpoints and 250 Mpoints optional upgrades)
- 16-bit resolution at 200 MHz (High Res mode)
- Windows 10 operating system (Optional)
- Four FlexChannel inputs (eight, with TLP058 logic probe)
- Options for decode and trigger support for CAN FD, MIL-STD-1553, ARINC429 and SENT bus
- Options for serial compliance testing for Automotive Ethernet and USB 2.0
- An advanced power analysis option with two rounds of free enhancements
- Additional capabilities including FastFrame segmented memory and enhanced autoset
- Three-year warranty
|Tektronix||TDP7704||TriMode Probe 4 GHz, With TekFlex™ connector technology, TekConnect interface|
|Tektronix||TDP7708||TriMode Probe 8 GHz, with TekFlex™ connector technology, TekConnect interface|
|Tektronix||TDP7706||TriMode Probe 6 GHz, with TekFlex™ connector technology, TekConnect interface|
|Tektronix||TAP4000||Single Ended Probe 4 GHz, with TekVPI interface|
|Tektronix||TDP4000||Differential Probe 4 GHz, with TekVPI interface|
|Tektronix||TLP058||Logic Probe 500 MHz, 8-channel general-purpose logic probe. Includes accessory kit.|
|Tektronix||HC5||Hard Case For 5 Series MSO|
|Tektronix||RM5||Rackmount Kit For 5 Series MSO|
|Tektronix||MSO64 6-WIN||Removable SSD with Windows license, installed option. Installed option: MSO64 6-WIN, Post-purchase: SUP6-WIN|
|Tektronix||Tek-DPG||TekVPI Deskew Pulse Generator Signal Source For Tektronix instruments that feature the TekVPI interface, including DPO/MSO/MDO3000 Series and DPO/MSO/MDO4000 Series oscilloscopes.|
|Tektronix||TEK-CDA||Probe Compensation and Deskew Accessory|
|Tektronix||6-AFG||Arbitrary Function Generator Installed option. Installed option: 6-AFG, Post-purchase: SUP6-AFG|
|Tektronix||6-RL-1||Record Length Option Extend record length to 125 M/ch maximum. Not compatible with 6-RL-2. Installed option: 6-RL-1, Post-purchase: SUP6-RL-1.|
|Tektronix||6-RL-2||Record Length Option Extend record length to 250 M/ch maximum. Not compatible with 6-RL-1. Installed option: 6-RL-2, Post-purchase: SUP6-RL-2.|
|Tektronix||6-SRAERO||Aerospace Serial Triggering and Analysis MIL-STD-1553, ARINC429, Installed option: 6-SRAERO, Post-purchase: SUP6-SRAERO|
|Tektronix||6-SRAUDIO||Audio Serial Triggering and Analysis I2S, LJ, RJ, TDM, Installed option: 6-SRAUDIO, Post-purchase: SUP6-SRAUDIO.|
|Tektronix||6-SRAUTO||Automotive Serial Triggering and Analysis CAN, CAN FD, LIN, FlexRay, Installed option: 6-SRAUTO, Post-purchase: SUP6-SRAUTO.|
|Tektronix||6-SRAUTOSEN||Automotive Sensor Serial Triggering and Analysis SENT, Installed option: 6-SRAUTOSEN, Post-purchase: SUP6-SRAUTOSEN|
|Tektronix||6-SRCOMP||Computer Serial Triggering and Analysis RS-232/422/485/UART. Installed option: 6-SRCOMP, Post-purchase: SUP6-SRCOMP.|
|Tektronix||6-SREMBD||Embedded Serial Triggering and Analysis I2C, SPI. Installed option: 6-SREMBD, Post-purchase: SUP6-SREMBD.|
|Tektronix||6-SRENET||Ethernet Serial Triggering and Analysis 10BASE-T, 100BASE-TX. Installed option: 6-SRENET, Post-purchase: SUP6-SRENET.|
|Tektronix||6-SRPM||Power Management Serial Triggering and Analysis SPMI, Installed Option|
|Tektronix||6-SRUSB2||USB Serial Triggering and Analysis USB 2.0 LS, FS, HS. Installed option: 6-SRUSB2, Post-purchase: SUP6-SRUSB2.|
|Tektronix||6-DJA||Advanced Jitter and Eye Analysis Installed option: 6-DJA, Post-purchase: SUP6-DJA.|
|Tektronix||6-PWR||Advanced Power Analysis Provides automated power measurements. Not compatible with 6-PS2. Installed option: 6-PWR, Post-purchase: SUP6-PWR.|
|Tektronix||6-PS2||Power Solution Bundle PWR, THDP0200, TCP0030A, deskew fixture, Installed option only. Not compatible with 6-PWR.|
|Tektronix||6-CMUSB2||USB2.0 Automated Compliance Test Requires TDSUSBF USB test fixture. ≥2.5 GHz bandwidth required for high-speed USB. Installed option: 6-CMUSB2, Post-purchase: SUP6-CMUSB2.|
|Tektronix||6-SEC||Enhanced Security For instrument declassification and password protected enabling and disabling of USB and Ethernet ports and firmware upgrades. Installed option.|
|Tektronix||P6960HCD-LV||Logic Analyzer Probe 34-channels, Single-ended, 75 Ω to 0.75 V Tip interposer resistor|
|Tektronix||P6962HCD||Logic Analyzer Probe 68-channels, Differential, 75 Ω to 0.75 V Tip interposer resistor|
|Tektronix||MSO64 T3||Three-Year Total Protection Plan Includes repair or replacement coverage from wear and tear, accidental damage, ESD or EOS plus preventative maintenance. Includes a 5-day turnaround time and priority access to customer support. Three-year coverage. Promo Through July 31, 2019 Get 20% Off Tektronix Total Protection Plan for MDO5Series Oscilloscopes.|
|Tektronix||MSO64 T5||Five-Year Total Protection Plan Includes repair or replacement coverage from wear and tear, accidental damage, ESD or EOS plus preventative maintenance. Includes a 5-day turnaround time and priority access to customer support. Five-year coverage. Promo Through July 31, 2019 Get 20% Off Tektronix Total Protection Plan for MSO5 Series Oscilloscopes.|