- This model includes option E1
- True DC to 2 GHz, 4 GHz or 6 GHz to support both analog and vector/digital signal generation
- Typical ?±0.30 dB amplitude accuracy (0 dBm CW signal at 22ºC) from 10 MHz to 6 GHz
- Modulation applications for GSM, EDGE, W-CDMA, APCO-25, DECT, NADC, PDC, and TETRA
- Soft key upgrade to vector/digital modulation at very low cost
- Analog and vector/digital signal generation capabilities
- I/Q modulation inputs (400 MHz RF bandwidth)
- ASK, FSK, MSK, PSK, QAM, VSB, and custom I/Q
- USB, GPIB, RS-232, and LAN interfaces
- 2U high and half standard rack width
- Dual baseband ARB generators
- Analog modulation standard
- 12 pounds (5.6 kg)
- Three-year warranty
Up to 200 MHz modulation bandwidth
The TSG4100A Series instruments use a new technique to provide spurious free outputs with low phase noise (-113 dBc/Hz at 20 kHz offset from 1 GHz carrier) and extraordinary frequency resolution (1 ?Hz at any frequency). The TSG4102A, TSG4104A and TSG4106A come standard with analog modulation. Convenient, in-field software upgrades allow for easy transition from analog to more advanced vector and digital modulation capabilities, providing the most flexible configuration and best CAPEX protection. The TSG4100A Series instruments use an ovenized SC-cut oscillator time-base, providing a 100 X improvement in stability compared to instruments that use a TCXO time-base.
The Tektronix TSG4100A Series RF Vector Signal Generators offer a wide variety of modulation capabilities. Modes include amplitude modulation (AM), frequency modulation (FM), phase modulation (?M), and pulse modulation. There is an internal modulation source as well as an external modulation input. The internal modulation source produces sine, ramp, saw, square, and noise waveforms. An external modulation signal may be applied to the rear panel modulation input. The internal modulation generator is available as an output on the rear panel.
The TSG4100A Series builds on this performance by adding full support for vector signal modulation on RF carriers between 400 MHz and 6.0 GHz. It features a dual arbitrary waveform generator operating at 125 MHz for baseband signal generation. The generator has built-in support for the most common vector modulation schemes: ASK, QPSK, DQPSK, ?/4 DQPSK, 8PSK, FSK, CPM, QAM (4 to 256), 8VSB, and 16VSB. It also includes built-in support for all the standard pulse shaping filters used in digital communications: raised cosine, root-raised cosine, Gaussian, rectangular, triangular, and more. Lastly, it provides direct support for the controlled injection of additive white Gaussian noise (AWGN) into the signal path.
Internal baseband generators
Using a novel architecture for I/Q modulation, the TSG4100A Series provides quick, user-friendly waveform generation. The baseband generator supports the playback of pure digital data. It automatically maps digital symbols into a selected I/Q constellation at symbol rates of up to 6 MHz and passes the result through the selected pulse shaping filter to generate a final waveform updated in real time at 125 MHz. This baseband signal is then modulated onto an RF carrier using standard IQ modulation techniques.
External IQ modulation
The rear-panel BNC I/Q modulation inputs and outputs enable arbitrary vector modulation via an external source. The external signal path supports maximally 400 MHz of RF bandwidth with a full scale range of ±0.5 V and a 50 Ω input impedance.
Easy remote communications
Remote operation is supported with RS-232, LAN, and GPIB interfaces. All instrument functions can be controlled and read over any of the interfaces. Up to nine instrument configurations can be saved in non-volatile memory.
TSG4100A Series RF Vector Signal Generators
|950 kHz to 2.0 GHz||950 kHz to 4.0 GHz||950 kHz to 6.0 GHz|
|Power output||+16.5 dBm to –110 dBm||+16.5 dBm to –110 dBm (<3 GHz)||+16.5 dBm to –110 dBm (<4 GHz) |
+10 dBm to –110 dBm (4-6 GHz)
|Voltage output||1.5 VRMS to 0.7VRMS||1.5 VRMS to 0.7 ?VRMS (<3 GHz)||1.5 VRMS to 0.7 ?VRMS (<4 GHz)|
*Frequency BNC output (all models) DC to 62.5 MHz. Please refer to Data Sheet for complete specifications.
Included: 1 meter, N-type to N-type RF cable, documentation CD, printed installation and safety instructions, statement of calibration and power cord.