- Technical Manuals
- 0.7 Cu Ft Workspace, 12W x 9H x 11.25D (20 liters)
- -42°C to +130°C Temperature Range
- Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller
- High/Low Limit Controller
- 120V Input - Plugs Into Any Outlet
- 3" Port on Left and Right Side
- Compact Size for Benchtop or Rack Mount Use
- Low Audible Noise
- Non-CFC Single-Stage Refrigeration
- No LN2 or CO2 Required
- Reversible Door
- cTUVus Listed to UL 61010-1 and CSA C22.2 No. 61010-1 (more info...)
- 3 Year Parts, 1 Year Labor Warranty
- Made by TestEquity in Moorpark, California
TestEquity Model 107 temperature chamber is small enough to fit on your bench with plenty of room to spare. It's smaller and uses 33% less power than the typical "benchtop" chamber. Plus, it fits in a 19" rack. Low audible noise makes the Model 107 ideal for use in confined workspaces. Requiring only 10 Amps at 120 V, you can plug it into any outlet - no need for a dedicated power line. The chamber door is reversible, to open from the left or right side. Two 3 " ports let you attach wires to the test sample through the left and right sides. Cools down to -42°C without LN2 or CO2.
Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller
|F4T Touch Screen Controller |
Modern touch screen interface
|Original F4 Controller |
Developed in 1998
NEW F4T Touch Screen Temperature Controller
The F4T is our next-generation controller. Featuring a touch-screen interface, it's exceptionally easy and intuitive to use. Includes RS-232 and Ethernet interfaces. GPIB is available as an option.
|F4T Feature||F4T Benefit|
|4.3 inch TFT Projected Capacitive (PCAP) color graphic touch screen||Modern interface for quick entry and readout of parameters and functions|
|Direct alphanumeric parameter entry||Quick and unambiguous entry of parameters for ease-of-use|
|Multiple levels of password security||Prevent tampering of critical parameters and processes by unauthorized persons|
|Profile archiving and transfer via USB Flash Drive||Quickly and easily transfer profiles to multiple chambers|
|Data Logging with transfer via USB Flash Drive or LAN||Simplify your documentation process|
|Graphical Trend Display||Eliminate circular chart recorders which have limited usefulnes|
|SCPI Commands||Easy programming of set points and readback of chamber conditions via Ethernet|
|F4 Compatibility Mode for most frequently used commands||Use your existing software that was written for the original F4|
|NEMA 4 / IP65 Rated||Front panel protects the controller against damage from dust and water intrusion|
Original F4 Temperature Controller
Up to 256 steps can be programmed into as many as 40 nameable profiles. The context sensitive information key and guided steps make profile programming fast and easy. A four-line backlit LCD displays programming, setup, operating and help information. A large LED readout indicates the actual chamber temperature with 0.1° resolution. Internal logic provides refrigeration compressor control for responsive and reliable performance. Includes two alarms and seven event outputs to control remote devices. RS-232C communications is also included. GPIB, Ethernet and analog retransmit are available as options.
More about the Original F4 Temperature Controller >>
High/Low Limit Controller
Provides user-adjustable independent protection against excess temperatures.
|Shown on optional cart.|
|Shown in a rack with |
optional rackmount kit.
Two 3" Access Ports
Two 3" (2.83" inside diameter) access ports are included. Lets you attach wires and sensors to your test sample through both the left and right side of the chamber.
Reversible Chamber Door
You won't need to rearrange you whole bench or workflow to accommodate the Model 107. The chamber door is reversible, allowing the door to open from the left or right side. This is also useful when placing two chambers side-by-side.
A stainless steel wire shelf ensures proper airflow around your test sample for uniform temperature distribution.
The TestEquity 107 is designed to use a minimum amount of bench space. Unlike "benchtop" chambers which take up almost your whole bench, the 107 has a 17" x 25.25" footprint. It can even fit on benches that have a hutch. Plus, it can also fit in a 19" rack. Put it on a cart, and you can roll it into even the smallest work cubicle.
The chamber's refrigeration system generates a low level of audible noise and vibration. You'll be able to work close to the chamber with minimum discomfort and distraction.
120 Volt Input
The Model 107 draws only 10 Amps maximum at 120 Volts. You can plug it into any standard wall receptacle, with plenty of power to spare for other equipment. Compare this to the typical "benchtop" chamber which draws up to 18 Amps and requires a dedicated line
Flexible Installation and Maintenence
The condenser airflow is from the front of the chamber to the back. Unlike chambers with side-to-side airflow, you can place Model 107 chambers along side each other. Front-to-back condenser airflow is also important for proper thermal management when the chamber is installed in a rack. And since the condenser grill is removeable from the front, you can clean the condenser without having to take apart your bench setup or removing the chamber from a rack.
World's Best Environmental Chamber Warranty
Only TestEquity offers a 3-year warranty on parts and 1-year warranty on labor. Our nationwide service network is qualified to do the job right. And we always have replacement parts in stock for immediate shipment. Labor warranty applies to the United States and Canada only. See the complete warranty statement here.
|TestEquity||F4T-T||Touch Screen Temperature Controller (no extra charge)|
|TestEquity||F4T-T-CASCADE||Touch Screen Controller with Part Temperature Control Adds the ability to control the part temperature instead of only the air temperature. Order instead of the F4T-T. More info >>|
|TestEquity||F4-TEMP||Legacy F4 Temperature Controller with Arrow Keys (no extra charge, not recommented for new applicatons, select instead of F4T-T)|
|TestEquity||1052||GPIB Interface (External interface converter box). Converts the temperature controller's serial interface to GPIB. More info >>|
|TestEquity||1054||Cart 24" L x 18" W. Height is adjustable from 26" to 42" in 4" increments. Shelves are 20 gauge steel, legs are 14 gauge steel. All metal joints are welded. Two of the 4" ball bearing casters can be locked. Non-slip rubber mat for the top shelf and three Velcro straps for cable management. Includes a 3-outlet 120V power strip with 12' cord, which mounts to the cart. Carts shipped after 12/1/2016 have black powder coat finish.|
|TestEquity||300374||Port Plug, Silicone Foam, 3"W x 2"L. Open-cell silicone sponge with closed-cell silicone facing. For Model 107 and Model 101H Chambers with 3" ports.|
|TestEquity||1071||Extra Shelf for Model 107. Chamber comes standard with one shelf.|