TestEquity 107-EX Benchtop Temperature Chamber (Environmental Chamber)

16910.1 MFG #: 107-EX
$0.00 / EA
  • Condition: New
  • Temperature, Highest: +130C
  • Temperature, Lowest: -42C
  • LN2 Boost Cooling: No
  • Input Voltage: 230V, 50Hz, 1 PH
  • Interior Volume: 0.7 Cu Ft
  • Manufacturer: TestEquity

Additional shipping charges will be applied to your order at time of invoicing.

QTY
  • Description
  • Technical Manuals

    • 107-EX: Export Version, 230V, 50Hz input (NOT for use in North America)
    • 0.7 Cu Ft Workspace, 12W x 9H x 11.25D< (20 liters)
    • -42°C to +130°C Temperature Range
    • Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller
    • High/Low Limit Controller
    • 3" Port on Left and Right Side
    • Compact Size for Benchtop or Rack Mount Use
    • Low Audible Noise
    • Non-CFC Single-Stage Refrigeration
    • No LN2 or CO2 Required
    • Reversible Door
    • Made by TestEquity in Moorpark, California

    TestEquity Model 107 temperature chamber is small enough to fit on your bench with plenty of room to spare. It's smaller and uses 33% less power than the typical "benchtop" chamber. Plus, it fits in a 19" rack. Low audible noise makes the Model 107 ideal for use in confined workspaces. The chamber door is reversible, to open from the left or right side. Two 3 " ports let you attach wires to the test sample through the left and right sides. Cools down to -42°C without LN2 or CO2.

    Ideal For Testing...

    • Tablets
    • Mobile Phones
    • Game Consoles
    • Small PC Boards

    • Handheld Devices

    • Medical Devices
    • Semiconductors
    • Disk Drives
    • Oscillators
    • Fiber Optic Components

    Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller

    F4T Controller F4 Controller
    F4T Touch Screen Controller
    Modern touch screen interface
    and connectivity
    Original F4 Controller
    Developed in 1998

    NEW F4T Touch Screen Temperature Controller
    The F4T is our next-generation controller. Featuring a touch-screen interface, it's exceptionally easy and intuitive to use. Includes RS-232 and Ethernet interfaces. GPIB is available as an option.

    F4T Feature F4T Benefit
    4.3 inch TFT Projected Capacitive (PCAP) color graphic touch screen Modern interface for quick entry and readout of parameters and functions
    Direct alphanumeric parameter entry Quick and unambiguous entry of parameters for ease-of-use
    Multiple levels of password security Prevent tampering of critical parameters and processes by unauthorized persons
    Profile archiving and transfer via USB Flash Drive Quickly and easily transfer profiles to multiple chambers
    Data Logging with transfer via USB Flash Drive or LAN Simplify your documentation process
    Graphical Trend Display Eliminate circular chart recorders which have limited usefulnes
    SCPI Commands Easy programming of set points and readback of chamber conditions via Ethernet
    F4 Compatibility Mode for most frequently used commands Use your existing software that was written for the original F4
    NEMA 4 / IP65 Rated Front panel protects the controller against damage from dust and water intrusion

    More about the F4T Touch Screen Controller >>

    Original F4 Temperature Controller
    Up to 256 steps can be programmed into as many as 40 nameable profiles. The context sensitive information key and guided steps make profile programming fast and easy. A four-line backlit LCD displays programming, setup, operating and help information. A large LED readout indicates the actual chamber temperature with 0.1° resolution. Internal logic provides refrigeration compressor control for responsive and reliable performance. Includes two alarms and seven event outputs to control remote devices. RS-232C communications is also included. GPIB, Ethernet and analog retransmit are available as options.
    More about the Original F4 Temperature Controller >>


    High/Low Limit Controller
    Provides user-adjustable independent protection against excess temperatures.

    Optional Cart
    Shown on optional cart.
    Optional rackmount kit
    Shown in a rack with
    optional rackmount kit.

    Two 3" Access Ports
    Two 3" (2.83" inside diameter) access ports are included. Lets you attach wires and sensors to your test sample through both the left and right side of the chamber.

    Reversible Chamber Door
    You won't need to rearrange you whole bench or workflow to accommodate the Model 107. The chamber door is reversible, allowing the door to open from the left or right side. This is also useful when placing two chambers side-by-side.

    Shelf
    A stainless steel wire shelf ensures proper airflow around your test sample for uniform temperature distribution.

    Compact Size
    The TestEquity 107 is designed to use a minimum amount of bench space. Unlike "benchtop" chambers which take up almost your whole bench, the 107 has a 17" x 25.25" footprint. It can even fit on benches that have a hutch. Plus, it can also fit in a 19" rack. Put it on a cart, and you can roll it into even the smallest work cubicle.

    Low-Noise Operation
    The chamber's refrigeration system generates a low level of audible noise and vibration. You'll be able to work close to the chamber with minimum discomfort and distraction.

    Flexible Installation and Maintenence
    The condenser airflow is from the front of the chamber to the back. Unlike chambers with side-to-side airflow, you can place Model 107 chambers along side each other. Front-to-back condenser airflow is also important for proper thermal management when the chamber is installed in a rack. And since the condenser grill is removeable from the front, you can clean the condenser without having to take apart your bench setup or removing the chamber from a rack.