- Technical Manuals
The New TestEquity Model 123H Temperature/Humidity Chamber gives you "big-chamber" features and performance in a compact, 120V-input design.
- 2.3 Cu Ft Workspace (18" W x 16.5" H x 13.5" D)
- Temperature -68°C to +175°C
- Humidity 10% to 95% RH. See specifications page for limitations.
- GN2 Purge System Included
- Four Event Relays Included
- Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller
- High/Low Limit Control and Alarm
- Viewing Window & Interior Light
- 4" Access Ports on Left & Right Side
- Non-CFC Cascade Refrigeration
- 120V Input - Plugs Into Any 20 Amp Outlet
- 3 Year Parts, 1 Year Labor Warranty
- Made by TestEquity in Moorpark, California
Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller
|F4T Touch Screen Controller |
Modern touch screen interface
|Original F4 Controller |
Developed in 1998
NEW F4T Touch Screen Temperature Controller
The F4T is our next-generation controller. Featuring a touch-screen interface, it's exceptionally easy and intuitive to use. Includes RS-232 and Ethernet interfaces. GPIB is available as an option.
|F4T Feature||F4T Benefit|
|4.3 inch TFT Projected Capacitive (PCAP) color graphic touch screen||Modern interface for quick entry and readout of parameters and functions|
|Direct alphanumeric parameter entry||Quick and unambiguous entry of parameters for ease-of-use|
|Multiple levels of password security||Prevent tampering of critical parameters and processes by unauthorized persons|
|Profile archiving and transfer via USB Flash Drive||Quickly and easily transfer profiles to multiple chambers|
|Data Logging with transfer via USB Flash Drive or LAN||Simplify your documentation process|
|Graphical Trend Display||Eliminate circular chart recorders which have limited usefulnes|
|SCPI Commands||Easy programming of set points and readback of chamber conditions via Ethernet|
|F4 Compatibility Mode for most frequently used commands||Use your existing software that was written for the original F4|
|NEMA 4 / IP65 Rated||Front panel protects the controller against damage from dust and water intrusion|
Original F4 Temperature Controller
Up to 256 steps can be programmed into as many as 40 nameable profiles. The context sensitive information key and guided steps make profile programming fast and easy. A four-line backlit LCD displays programming, setup, operating and help information. A large LED readout indicates the actual chamber temperature with 0.1ï¿½ resolution. Internal logic provides refrigeration compressor control for responsive and reliable performance. Includes two alarms and seven event outputs to control remote devices. RS-232C communications is also included. GPIB, Ethernet and analog retransmit are available as options.
More about the Original F4 Temperature Controller >>
High/Low Temperature Limit Controller and Alarm
Provides independent protection against excess temperatures. Both high and low limits can be set. The upper LED readout indicates the actual chamber temperature while the lower readout indicates the status The limit controller will shut down the chamber and trigger the audible alarm in the event of an out of limit condition. A set of uncommitted contacts are available to provide a safety power interlock for your test sample.
Accurate Humidity Measurement
A fast responding Vaisala capacitive-type sensor eliminates the need for unreliable wet-wicks.
GN2 Purge Capability Standard
For low humdity conditions below 6ï¿½C Dewpoint (requires customer-supplied gaseous nitrogen supply). More Info >>
Event Relays Standard
Four uncommitted solid-state relays are provided to switch the power to remote AC devices via the F4 Temperature/Humidity Controller.
120 Volt Input
Heated multi-pane window eliminates fog and condensation without a manual wiper.
Two 4" Access Ports
Lets you attach wires and sensors to your test sample through both the left and right side of the chamber.
A heavy-duty stainless steel wire shelf ensures proper airflow around your test sample for uniform temperature distribution.
Rugged casters permit easy movement.
World's Best Environmental Chamber Warranty
Only TestEquity offers a 3-year warranty on parts and 1-year warranty on labor. Our nationwide service network is qualified to do the job right. And we always have replacement parts in stock for immediate shipment. Labor warranty applies to the United States and Canada only. See the complete warranty statement here.
Accurate Humidity Measurement
A fast responding capacitive-type sensor eliminates the need for unreliable wet-wicks.
Reliable Vapor Generator
Unlike "atomizing" systems, the heated vapor generator has no pump to fail or orifice to clog. The stainless-steel vapor generator assembly is double-protected against low-water and over-temperature conditions.
We use a combination of structural foam and fiberglass blanket insulation for a higher combined R-factor than just fiberglass alone. The door sealing surface is kept warm by circulating excess heat from the refrigeration system. The result is a cabinet that does not sweat due to condensation during low temperature operation.
Water Recirculation System
The optional water recirculation system provides a reliable source of demineralized water for the humidity system, using ordinary tap or pre-filtered water. Condensate from the chamber is returned back to the water tank. The recirculation pump operates only when needed to fill the chamber's humidifier to the correct level. Perfect for installations where a water line and drain are not available.
(Optional, and highly recommended) More Info >>
Reliability & Safety That's Designed In
Non-CFC refrigerants are used in a cascade (two compressors) configuration. Expansion valves provide optimum performance throughout the operating range. Pressure regulators keep the operating pressures within safe limits regardless of load conditions. Liquid injection ensures cool compressor operation during high-temperature pull down for long life. Sequential starting of each compressor reduces the current demand on start-up. Each compressor is protected by high/low pressure switches. Care has been taken to use a minimum number of fittings, joints and welds to reduce the possibility of refrigerant leaks.
All electrical control components are UL approved. The nichrome air-heater has a low watt-density and even heat distribution for reliable performance and fast response. A fusible link provides fail-safe protection against thermal runaways, in addition to the microprocessor-based high/low limit controller.
The side and rear panels are removable to permit complete access to the refrigeration and humidity system for ease of service and preventive maintenance.
|TestEquity||231||Extra Shelf with Clips for Model 123 Chamber comes standard with one shelf.|
|TestEquity||17||Dry Air Purge for 123H (North America Version) Can be added in the field. Heatless regenerative desiccant air drier. Requires 5 cfm supply air flow rate at 100 psig (175 psig max) to be supplied by customer. More info >>|
|TestEquity||1056||Ethernet Interface (External) (External interface converter box) Converts the temperature controller's serial Modbus interface to Ethernet. Allows you to program with simple ASCII commands instead of Modbus packets. Not compatible with GPIB Option 0003. Replaces TE-1055. More info >>|
|TestEquity||1052||GPIB Interface (External) (External interface converter box) Converts the temperature controller's serial interface to GPIB. More info >>|
|TestEquity||22||Circular Chart Recorder (Factory Installed) Honeywell DR4300 Series. Two pen, 10" circular chart. Records chamber temperature and humidity. 24-hour rotation.|
|TestEquity||300534||Port Plug, Silicone Foam, 4" D x 4" L Open-cell silicone sponge with closed-cell silicone facing. Standard 4" port plug for all Model 123, 140, 1007, 1027, 1016, 3007C, and 200H Series chambers.|
|TestEquity||14||Replacement Water Filters (Box of 6) For use with 0010, 0016, and W100 Water Recirculation Systems.|
|TestEquity||W100||Water Recirculation System Provides a reliable supply of filtered water for the humidity system. Perfect for installations where a water line and drain are not available. Uses 0014 filters (one included).|
Highly Recommended! More info >>
|TestEquity||200203||Replacement Light Bulb for 115 Series and 123 Series 15W 120V E14 base. NOT for 123C-EX, 123H-EX, or 123HS-EX.|
|TestEquity||0017-EX||Dry Air Purge for 123H-EX (Export Version) Can be added in the field. Heatless regenerative desiccant air drier. Requires 5 cfm supply air flow rate at 100 psig (175 psig max) to be supplied by customer. More info >>|