MT1040A Network Master Pro (400G Tester)

The portable B5-size Network Master Pro MT1040A for 400G has customized expandability with easy operation. Installing the OTDR measurement module supports optical fiber continuity tests.

The MT1040A supports various network interfaces, such as 10M to 400G Ethernet, OTN (OTU1 to OTU4), CPRI/OBSAI, etc. Recent network speed increases and diversification have increased the importance of on-site testing and network installation and maintenance.

• 9-inch active TFT display (800 × 480 pixels) and touch screen display
• USB Data Interface:
• MT1040A operates as host: USB 2.0 type A (2 Ports)
• MT1040A operates as device: USB 2.0 type Mini-B (1 port)
• Ethernet Interface:
• Ethernet 10M/100M/1000M, RJ45 Connector: 1 port
• WLAN Interface *1: IEEE802.11a/b/g/n (2.4 GHz/5 GHz)
• Bluetooth Interface*2: Bluetooth (BT2.1+EDR/3.0/4.2 (BLE)) (File access only)
• *1: Available for certified countries and regions including USA, Japan and EU countries. Please visit the Anritsu web site for updated information.
• *2: Although this product has not been approved by Bluetooth SIG, the supported frequencies are in the range assigned to Bluetooth communications.
• AUX Connector: For connection of G0325A GPS receiver
• Internal Clock: Accuracy: ±4.6 ppm or less, STRATUM3 compliant
• Ext. Clock Input: For connection of external clock signals: SETS (E1: 2.048 Mbps), BITS (DS1: 1.544 Mbps) or 2.048 MHz TTL signal in accordance with ITU-T G.703, 10 MHz, Connector: BNC (50 Ohms)
• Storage Capacity: 7 Gbyte

With multiple protocols, the all-in-one Network Master Pro supports various network types.

• Supported Interfaces
• Ethernet: 10M/100M/1000M, 10G/25G/40G/100G/200G, 400G
• OTN/SDH/SONET: 2.5G/10G/40G/100G
• Mobile back/fronthaul: eCPRI/RoE/CPRI/OBSAI
• Fibre Channel: 1GFC to 16GFC

The full range of built-in versatile MT1040A functions make field testing easy.

• Intuitive operation using large 9-inch color touch panel
• 400G Dual Ports Measurements (Option)
• SEEK function supporting fast, automated, on-site installation and maintenance test procedures
• Remote-controlled, long-term continuity testing using VNC
• Wireless control over WLAN (*1)
• Optical fiber end-face condition inspection using dedicated Fiberscope
• Stable Linux OS based test environment (*2)
• User measurement module retrofitting
• *1 Optional depending national and regional rules - see approved list (which may change without prior warning)
• *2 Regarding source program

• MT1040A-006 High Power Supply
• Line Cord
• B0745A Softcase
• B0771A MT1040A Rear Panel kit
• G0418A AC Adaptor
• G0423A Two LiION Batteries
• W4039AE Quick Reference Guide
• Z1746A Stylus
• Z2077A Utilities ROM
• Z2082A Handle