GF Signet 3-2536-P0 Flow Sensor, PP Body, Titanium, Black PVDF Rotor, 0.5 to 4", 2536 Series

Type 2536 Rotor-X Paddlewheel Flow Sensor

Features

• Operating range 0.1 to 6 m/s (0.3 to 20 ft/s)
• Wide turndown ratio of 66:1
• Open-collector output
• Highly repeatable output
• Simple, economical design
• Installs into pipe sizes DN15 to DN900 (½ to 36 in.)
• PVC 2536 version DN15 to DN100 (½ to 4 in.) for concentrated Sodium Hypo chlorite 12.5% applications
• High resolution and noise immunity
• Test certificate included for -X0, -X1
• Chemically resistant materials

Simple to install with time-honored reliable performance, type 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The type 2536 has a process-ready open collector signal with a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s). The sensor measures liquid flow rates in full pipes and can be used in low pressure systems.

The type 2536 sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices including PP and PVDF make this type highly versatile and chemically compatible to many liquid process solutions.

Sensors can be installed in DN15 to DN900 (½ to 36 in.) pipes (except the 2536 PVC versions, which can be installed in DN15 to DN100 (½ to 4 in.) pipes), using GF ’s comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, seat the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap installation requirements.

Applications

• Pure Water Production
• Filtration Systems
• Chemical Production
• Liquid Delivery Systems
• Pump Protection
• Scrubber/Gas Stacks
• Gravity Feed Lines
• Not suitable for gas
• Sodium Hypochlorite transfer/injection/batching (3-2536-G0)