TDK-Lambda Z60-14-U DC Power Supply, Single Output 60 V, 14 A, 840 W, USB, RS-232, RS-485, Z+ Series
Our Part #24603.1
Mfr Part #Z60-14-U
TDK-Lambda Z60-14-U DC Power Supply, Single Output 60 V, 14 A, 840 W, USB, RS-232, RS-485, Z+ Series
Our Part #24603.1
Condition:New
Mfr Part #Z60-14-U
- Description
- Specifications
- Documents
High Power Density 200W, 400W, 600W, 800W in 2U (3.5" high) 33 Models ranging from 0-10 VDC to 0-650 VDC output Wide Range Input (85-265 VAC continuous) Active Power Factor Correction (0.99 typical Last-Setting Memory Parallel Operation with Active Current Sharing, for up to six identical units Arbitrary functions and output sequencing Built-in USB, RS-232 & RS-485 Interface Optional LAN, GPIB & Isolated Analog Programming Optional front panel output terminals Optional dual/triple housing for bench use Optional Rack Mount for up to six units (or four units with front terminals) Constant Current or Voltage Modes Five Year Warranty UL Listed for USA and Canada, CE Mark
Z+ Series power supplies are wide output range, high performance switching power supplies. The Z+ Series is power factor corrected and operates from worldwide AC voltage range continuously. Output voltage and current are continuously displayed and LED indicators show the complete operating status of the power supply. The Front Panel controls allow the user to set the output parameters, the protection levels (Over-Voltage protection, Under-Voltage protection and Foldback) and preview the settings. The rear panel includes the necessary connectors to control and monitor the power supply operation by remote analog signals or by the built-in serial communication USB and RS-232/485. LAN, GPIB and Isolated-Analog programming/monitoring are optional.
The Z+ Series power supplies series can be configured into a programmable power system of up to 31 units using the built-in USB or RS-232/RS-485 communication port in the power supply and the RS-485 linking cable provided with each power supply. In a LAN system, each power supply can be controlled using the optional LAN interface (factory installed). In an GPIB system, each power supply can be controlled using the optional GPIB interface (factory installed).
Models are available with optional front panel terminals rated at up to 60V and 24A maximum. Not available on models with over 60V output rating.
Standard models are 1/6 rack width, models with optional front panel terminals, GPIB, or Isolated Analog Interface are 1/4 rack width.
| Model | Volts Max (V) |
Current Max (A) |
Power Max (W) |
|---|---|---|---|
| Z10-20-U | 10 | 20 | 200 |
| Z10-40-U | 10 | 40 | 400 |
| Z10-60-U | 10 | 60 | 600 |
| Z10-72-U | 10 | 72 | 720 |
| Z20-10-U | 20 | 10 | 200 |
| Z20-20-U | 20 | 20 | 400 |
| Z20-30-U | 20 | 30 | 600 |
| Z20-40-U | 20 | 40 | 800 |
| Z36-6-U | 36 | 6 | 216 |
| Z36-12-U | 36 | 12 | 432 |
| Z36-18-U | 36 | 18 | 648 |
| Z36-24-U | 36 | 24 | 864 |
| Z60-3.5-U | 60 | 3.5 | 210 |
| Z60-7-U | 60 | 7 | 420 |
| Z60-10-U | 60 | 10 | 600 |
| Z60-14-U | 60 | 14 | 840 |
| Z100-2-U | 100 | 2 | 200 |
| Z100-4-U | 100 | 4 | 400 |
| Z100-6-U | 100 | 6 | 600 |
| Z100-8-U | 100 | 8 | 800 |
| Z160-1.3-U | 160 | 1.3 | 208 |
| Z160-2.6-U | 160 | 2.6 | 416 |
| Z160-4-U | 160 | 4 | 640 |
| Z160-5-U | 160 | 5 | 800 |
| Z320-0.65-U | 320 | 0.65 | 208 |
| Z320-1.3-U | 320 | 1.3 | 416 |
| Z320-2-U | 320 | 2 | 640 |
| Z320-2.5-U | 320 | 2.5 | 800 |
| Z375-2.2-U | 375 | 2.2 | 825 |
| Z650-0.32-U | 650 | 0.32 | 208 |
| Z650-0.64-U | 650 | 0.64 | 416 |
| Z650-1-U | 650 | 1 | 650 |
| Z650-1.25-U | 650 | 1.25 | 812 |
Â
| Factory Installed Options (not field installable) | |
| Front panel terminals (60V or 24A max)* | Â -L |
| Only one of the options below can be included: | |
| GPIB Interface* | Â -IEEE |
| Voltage Programming Isolated Analog Interface* | Â -IS510 |
| Current Programming Isolated Analog Interface* | Â -IS420 |
| LAN Interface | Â -LAN |
*Requires wide body (105mm) case style
Part Number Example:
Z10-20-LAN-L-U (includes LAN interface and Front Panel Terminals)