2 TBL0510-1, 1 TBLM2, 1 BNC Termination, 1x N-Male to BNC-Male 75 cm RG58, 2x BNC-Male to BNC-Male 35 cm RG223

TBL0510-1 5uH Line Impedance Stabilisation Network LISN
SPECIFICATIONS

• Frequency range: 10 kHz – 400 MHz; depending on standard and external capacitor
• DC Resistance: 40 mΩ
• Continuous current: 10A
• Nominal operating voltage range: 0 – 60V DC
• Absolute maximum rating of internal components: 200V DC; external 1µF capacitor: 100V
• Built in surge protection
• External 1µF source capacitor, for easy removal when using the LISN for 7637-2 tests

The TBL0510-1 is an affordable 5µH LISN designed for conducted emission measurements in the frequency range of 100 kHz to 400 MHz. It complies with CISPR-25 (EN 55025), numerous automotive manufacturer standards, MIL-STD-461F, DO-160, AECTP-500 and ISO 7637-2.

TBLM2 LISN Mate
SPECIFICATIONS

• Nominal frequency range: 150 kHz – 100 MHz
• Usable frequency range: 9kHz – 110 MHz
• Port impedance
• │ZLISN1│, │ZLISN2│,│ZCM│: 150 kHz – 1 MHz: 30…55 Ohm, 1 MHz -30 MHz: 50….60 Ohm, 30 MHz – 100 MHz: 50….70 Ohm
• │ZDM│: 150 kHz – 1 MHz: 30…50 Ohm, 1 MHz -30 MHz: 40….50 Ohm, 30 MHz – 100 MHz: 40….70 Ohm
• │ZLISN1│: independent of the termination at the LISN2 port
• │ZLISN2│: independent of the termination at the LISN1 port
• │ZCM LISN1-LISN2│: 25 Ohm nominal
• │ZDM LISN1-LISN2│: 100 Ohm nominal
• Maximum RF level at any BNC port: 27dBm
• Maximum DC current at any BNC port: 30 mA

The TBLM2 is a Common Mode / Differential Mode – separator companion device for LISN. The LISN Mate is connected to the output of a LISN inserted into the positive supply line and to a second LISN inserted into the negative supply line.