Keysight N2140A 1:1/10:1 200 MHz Passive Oscilloscope Probe, 2 Pack

• Bandwidth DC to 200 MHz
• Cable length 1.3 m
• Switchable 1:1 or 10:1 attenuation ratio
• Input resistance of 1 MΩ (1:1) or 10 MΩ (10:1)
• Maximum input of 150 Vrms CAT II (1:1) or 300 Vrms CAT II (10:1)
• 100 pf (1:1) or 15 pf (10:1) input capacitance
• Compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input
• 2 Pack

The Keysight N2140A passive probe is a very affordable choice that offers a 10:1 / 1:1 switchable attenuation and a bandwidth of up to 200 MHz. It has a 10 M ohm input resistance (that can be switched to 1 M ohm) to suit different measurement scenarios with minimal probe loading. You can fine-tune the probe for low and high frequencies as needed. To ensure the best measurements, you need to adjust your probe to match the oscilloscope’s properties. This probe works with Keysight InfiniiVision Series oscilloscopes that have a 1 M ohm input.

• Passive probe, 2 Each
• Ground Spring, 2 Each
• Ground Lead, 2 Each
• Adjustment Tool
• Hook Tip, 2 Each
• Protective Cap
• Channel Identification rings, 16 rings total (4 rings of each color)