Keysight PP0003A 1 GHz Hi-Z+ Probe

• 1 GHz of analog bandwidth (<4 pF input capacitance)
• 30 Vrms CAT II input voltage, and up to 42.4 V peak transient overvoltage
• 10 MΩ input impedance at low frequencies
• AutoProbe I compatibility
• 1.3 meter cable length for ease of use
• Small 5mm tip and compact probe design for easy probing on smaller targets
• Variable attenuation, automatically configured by the oscilloscope
• Rigid tip for secure device-under-test connectivity

The PP0003A is Keysight’s first MMCX compatible passive probe with up to 1GHz of analog bandwidth with less than 4 pF of capacitive loading. It provides all the ease of use benefits of a passive probe, with the performance seen from an active probe. The AutoProbe I interface provides offset and auto configuration of probe type and attenuation setting.

The PP0003A is designed for use on InfiniiVision and Infiniium oscilloscopes with the AutoProbe I interface, with the use of the PP0004A adapter. The PP0001A/2A/3A probes are a new generation of Hi-Z+ probes for which the probe is to be viewed as a combination of the “probe and probe adapter (PP0004A)”. This combination does not have a fixed attenuation ratio but rather has multiple available attenuation ratios per given V/div settings to accommodate a very large dynamic range and flat frequency response.

• Channel identification rings (4 each, in 4 colors)
• Red and black mini grabbers
• MMCX to 0.025” square pin adapter
• Adapter for PP0001A, PP0002A, PP0003A