Techni-Pro 10092952 Work Station Monitoring Kit, ESD, with Gray Table Mat, 24" x 36"

Techni-Pro 10092952 -- ESD Workstation Kit with 24" x 36" Mat, Wrist Strap and Continuous Monitor

This kit contains a gray, two layer, 0.08" thick rubber mat with a smooth surface, 10mm snaps and a common point ground cord.

Meets or exceeds the requirements of ANSI/ESD S20.20 per ANSI/ESD STM4.1

This ESD matting is rated to 190°F (87°C). Please note - it is heat resistant, not heat proof. It will withstand exposure to high temperatures, but it is dependent on exposure time.

Includes:

• 24" x 36" gray rubber mat with grounding hardware
• Wrist strap (elastic band, 7mm snap, 12 foot cord) - 758ST9806
• Single wire continuous monitor - 758ST9201

Features:

• Elongation: >300%
• Resistance: 10^6 – 10^8
• Resistance category: Dissipative
• Mat has a black conductive bottom layer and static dissipative colored top layer – resistance of less than 1.0×10^9 ohms
• Monitor is designed to measure resistance of the operator’s path to ground
• Monitor will trigger either when operator falls out of spec, becomes disconnected, or ground is lost

Continuous monitor

This package also contains a single operator continuous monitor. It is designed to monitor resistance of the operator’s path to ground and triggers either when the operator falls out of spec, becomes disconnected, or ground is lost.

It supports 1 operator via single wire ESD wrist strap and has universal support for standard 4mm banana type grounding coil cords. A multi-color LED and piezo buzzer provide the operator with both visual and audible feedback in the event of a ground system fault.

It features a fixed resistor system - go/no go. Low Fail <675k, Pass >750k to <8meg, Fail High >8.5meg, ± 10%