Fixmaster Aluminum Putty is a two-part epoxy system heavily reinforced with aluminum powder. Ideal for repairing non-structural defects in aluminum castings or for use where an aluminum finish is desired. This product is typically used in applications with an operating range of 30 deg C to 95 deg C (20 deg F to 200 deg F). Typical applications include repairing aluminum castings and worn aluminum parts, making models and jigs for odd-shaped parts, and making aluminum dies.

Features:

• Brand: Fixmaster®
• Series: PC 7254
• Product Type: Epoxy Adhesive
• Hardness: 84Shore D
• Material Compatibility: Aluminum
• Color: Part A:Gray Part B:Silver
• Primary Color: Part A:Gray Part B:Silver
• Mix Ratio: 6.3:1
• Physical Form: Paste
• Cure Time: 6h
• Viscosity Measurement: Part A:1900000 to 2600000 Part B:1500000 to 2500000cP
• Chemical Composition: Part A:Aluminum, Epoxy Resin, Calcium Carbonate, Treated Fumed Silica Part B:Amine Adduct, Triethylenetetramine, Aluminum, Silicon Dioxide, Substituted Piperazine, 4,4'-Isopropylidenediphenol, Aliphatic Amine, Alkyl Phenol, Benzyl Alcohol, Benzyldimethyla
• Specific Gravity: Part A:1.56 Part B:1.5
• VOCs Content: <10g/L
• Odor: Part A:Slight Part B:Slight/Ammoniacal
• Cure Type: Room 25°C
• Elongation at Break: 0.41%
• Gel Time: 60 to 80min
• Tensile Strength‎: 4230psi
• Maximum Operating Temperature: +225°F
• Minimum Operating Temperature: -20°F
• Container Capacity: 1lb
• Container Type: Kit
• Applications: Bonding, Repairing Aluminum Castings and Worn Aluminum Parts, Making Models and Jigs and Making Aluminum Dies
• Package Quantity: 6CA

• Brand: Fixmaster®
• Series: PC 7254
• Product Type: Epoxy Adhesive
• Hardness: 84Shore D
• Material Compatibility: Aluminum
• Color: Part A:Gray Part B:Silver
• Primary Color: Part A:Gray Part B:Silver
• Mix Ratio: 6.3:1
• Physical Form: Paste
• Cure Time: 6h
• Viscosity Measurement: Part A:1900000 to 2600000 Part B:1500000 to 2500000cP
• Chemical Composition: Part A:Aluminum, Epoxy Resin, Calcium Carbonate, Treated Fumed Silica Part B:Amine Adduct, Triethylenetetramine, Aluminum, Silicon Dioxide, Substituted Piperazine, 4,4'-Isopropylidenediphenol, Aliphatic Amine, Alkyl Phenol, Benzyl Alcohol, Benzyldimethyla
• Specific Gravity: Part A:1.56 Part B:1.5
• VOCs Content: <10g/L
• Odor: Part A:Slight Part B:Slight/Ammoniacal
• Cure Type: Room 25°C
• Elongation at Break: 0.41%
• Gel Time: 60 to 80min
• Tensile Strength‎: 4230psi
• Maximum Operating Temperature: +225°F
• Minimum Operating Temperature: -20°F
• Container Capacity: 1lb
• Container Type: Kit
• Applications: Bonding, Repairing Aluminum Castings and Worn Aluminum Parts, Making Models and Jigs and Making Aluminum Dies
• Package Quantity: 6CA