Nordbak Brushable Ceramic Gray is an ultra-smooth, ceramic-reinforced epoxy that provides a high gloss, low friction coating designed to protect against turbulence and abrasion under typical dry service temperatures of -29 deg C to 120 deg C. Used by itself, Nordbak Brushable Ceramic Gray is recommended for sealing and protecting equipment from corrosion and wear. It also works as a top coat over Nordbak Wearing Compounds for applications requiring surface rebuilding and lasting protection. Typical applications include providing a smooth, protective, abrasion-resistant coating, repairing heat exchangers and condensers, lining tanks and chutes, resurfacing and repairing rudders and pintel housings, and repairing cooling pump impellers and butterfly valves.

Features:

• Ceramic-filled to protect against fine particles
• Brushable with self-levelling properties
• High gloss, low friction finish

• Brand: Loctite® Nordbak®
• Series: PC 7333GY
• Product Type: Corrosion Resistant Coating
• Material Compatibility: Sealing and Protecting Equipment
• Physical Form: Paste Liquid
• Container Type: Kit
• Container Capacity: 2lb
• Cure Time: Gel Time:34 to 48 mins Recoat Time:1 to 3 h
• Application Method: Brush
• Mix Ratio: 2.75:1 4.8:1
• Odor: Epoxy Resin:Epoxy/Mild/Petroleum Epoxy Hardener:Ammoniacal
• Specific Gravity: Epoxy Resin:1.743 Epoxy Hardener:1.0616
• Viscosity Measurement: 20000mPa/s
• VOCs Content: <1g/L
• Storage Conditions: Cool, Well-Ventilated Area Away from Heat, Sparks, Open Flame and Other Sources of Ignition, Keep Container Tightly Closed
• Flash Point: >199.4°F
• Maximum Operating Temperature: +120°C
• Minimum Operating Temperature: -29°C
• Color: Epoxy Resin:White Epoxy Hardener:Light Yellow
• Primary Color: Epoxy Resin:White Epoxy Hardener:Light Yellow
• Package Quantity: 1CA