TestEquity
TekBox
TekBox

TekBox TBPS01 EMC Near-Field Probe Set: H20, H10, H5 And E5, SMB Connectors, 3GHz

Our Part #20000346

Mfr Part #TBPS01

TekBox TBPS01
TekBox
TekBox

TekBox TBPS01 EMC Near-Field Probe Set: H20, H10, H5 And E5, SMB Connectors, 3GHz

Our Part #20000346

Mfr Part #TBPS01

$199.00EACH

TBPS01 EMC Near Field Probe Set

Features:

  • Slim design for good access in between tightly spaced components
  • Shielded loops to avoid picking up common mode noise; insensitive to the human hand
  • Frequency range: 3GHz, though they can be used well beyond
  • SMB connectors to avoid twisting the RF cable when scanning DUTs

Probe Specs:

  • H20 H-Field - 170 mm Long, 20 mm Loop
  • H10 H-Field - 170 mm Long, 10 mm Loop
  • H5 H-Field - 170 mm Long, 5 mm Loop
  • E5 E-Field - 170 mm Long, 5 mm Tip

The H20, H10, H5 and E5 are magnetic field (H) and electric field (E) probes for radiated emissions EMC pre- compliance measurements. The probes are used in the near field of sources of electromagnetic radiation. They serve to locate and identify potential sources of interference within the building blocks of electronic assemblies.

The probes act similar as wide bandwidth antennas, picking up radiated emissions from components, PCB traces, housing openings or gaps and from any other parts that could be emitting RF. The probes are usually connected to a spectrum analyser. Scanning the probe over the surface of a PCB assembly or housing quickly identifies locations which emit electromagnetic radiation. By changing to a probe with smaller size, the origination of the emissions can be further narrowed down.

Additional applications are RF immunity tests by feeding a RF signal into the probe and radiating it into potentially susceptible circuit sections: Furthermore the probes can be used in the field of repair or debugging to track down issues in RF signal chains by contactless measurement of RF signal levels. One more application is non- invasive measurement of RF building blocks such as modulators or oscillators. Frequency, phase noise and spectral components can be measured in conjunction with a low noise preamplifier. The TBWA2/20dB and TBWA2/40db wideband amplifiers are connected between EMC probe and Spectrum Analyzer to increase the dynamic range of the measurements.

In The Box:

  • EMC probe set consisting of H20, H10, H5, E5
  • 75cm SMB to SMA cable
  • Measurement plots
  • SMA-female to N-male coaxial adapter
  • Transparent plastic box
  • Manuals/Guides

Brand: TekBox
Includes: Probe set: H20, H10, H5, E5; 75cm SMB to SMA cable; Measurement plots; SMA(f) to N(m) coaxial adapter; Transparent plastic box
$199.00EACH