• Voltage measurement: 4 - 600 V RMS value ± 0.5% of the measured value ± 5 digits / 0.1 V
• Real-time test, register and measurement of voltage and current
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks)
• Max. clamp opening: 55 mm (2.2 in)
• Graphic display
• Auto shut-off after 15 min. (this function may be disabled)
• USB interface
• Overload indication: OL
• Software and data cable included in the delivery
• Memory: 50,000 readings

The PCE-GPA 62 is a Three-Phase Clamp Meter (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive, and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The Three-Phase Clamp Meter PCE-GPA 62 comes with a built-in graphic display to show network analyzer values. Measured values can be both recorded and transferred to a PC for further analysis. The Three-Phase Clamp Meter PCE-GPA 62 is a professional handheld device to determine several parameters. Thanks to the backlight display, it is possible to get an accurate reading of measured values even with poor light conditions. Although the Three-Phase Clamp Meter PCE-GPA 62 comes calibrated from the manufacturer, an optional laboratory calibration and certificate, that meets ISO standards, can be ordered separately with the device or when an annual recalibration is required.

What's in the Box

• 1x Three-Phase Clamp Meter PCE-GPA 62
• 2x Isolated measuring pins with 2 m / 6.6 ft of cable each
• 2x 1.5V AA Batteries
1x Carrying case1x USB cable for a PC1x Software (in English)
• 1x User manual