Digilent 6003-410-017 Python Productivity for Zynq-7000 ARM/FPGA SoC

Digilent 6003-410-017 PYNQ-Z1 Board

The PYNQ-Z1 development board is designed to work with the PYNQ open-source framework, which enables developers to program its onboard system-on-chip (SoC) using Python. Built around the AMD Zynq-7000 SoC, the board integrates FPGA programmable logic with a dual-core ARM Cortex-A9 processor, providing a flexible platform for hardware and software development.

Similar in form factor and functionality to Digilent's Arty Z7, the PYNQ-Z1 features Arduino-compatible headers, Pmod ports, onboard I/O, HDMI input and output, audio output, and USB and Ethernet connectivity. Its customizable architecture makes it well suited for a wide range of applications, including computer vision, industrial control, Internet of Things (IoT), encryption, and embedded computing acceleration.

The PYNQ-Z1 can be booted from a microSD card containing the appropriate PYNQ-Z1 boot image. The image is available as a free download and can be written to a microSD card for use with the board. For installation instructions, downloads, and additional resources, refer to Digilent's support materials.

Features and Specifications

• 13,300 logic slices, each with four 6-input LUTs and 8 flip-flops
• 630 KB of fast block RAM
• 4 clock management tiles, each with a phase-locked loop (PLL) and mixed-mode clock manager (MMCM)
• 220 DSP slices
• On-chip analog-to-digital converter (XADC)

Digilent 6003-410-017 PYNQ-Z1 Board FAQ

1. What is the PYNQ-Z1 board?
   The PYNQ-Z1 board is the hardware platform for the PYNQ open-source framework. It enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to design programmable logic circuits. Instead the APSoC is programmed using Python, with the code developed and tested directly on the PYNQ-Z1.
2. What accessories or cables are required (and what comes in the box)?
   The standard SKU (6003-410-017) typically includes only the PYNQ-Z1 board itself. It does not include a micro-USB cable, an Ethernet cable, a power adapter (7V–15V center-positive jack), or a microSD card. You must provide a class-compliant microSD card (32GB or smaller) flashed with the official PYNQ-Z1 image from the PYNQ Documentation.
3. How do I setup my computer to connect to the Pynq-Z1 board?
   Connect your board to a network by plugging the Ethernet cable into the board, and the other end into a network switch or home router, both devices typically receive automatic IP addresses and communicate without manual setup. However, a direct Ethernet connection from computer to board requires matching static IP addresses: the board assigns itself a static IP, and you must manually assign a static IP in the same range to your computer.
4. What is the power supply for the PYNQ-Z1?
   The PYNQ-Z1 can be powered from the Digilent USB-JTAG-UART port (J14) or from some other type of power source such as a battery or external power supply. Jumper JP5 (near the power switch) determines which power source is used. Note, a USB 2.0 port can deliver maximum 0.5A of current according to the specifications. This should provide enough power for lower complexity designs. A suitable external power supply is included with the PYNQ-Z1 accessory kit (240-114-1).