Keithley 2260B-80-13 Programmable DC Power Supply

22707.1 MFG #: 2260B-80-13
$1,710.00 / EA
  • Amps: 13.5
  • Voltage: 80
  • Watts: 360
  • Condition: New
  • Drill Down Description: Programmable DC Power Supply
  • Model: 2260B-80-13
  • Quote Required: No
  • Web Meta Description: Keithley 2260B-80-13 - 0-80V, 0-13A.5, 360W max., TestEquity is an authorized Keithley distributor.

  • Description

    • Model 260B-80-13, 0-80V, 0-13A.5, 360W max.,
      (NOTE: V * A output cannot exceed the power rating)
    • Programmable voltage or current rise and fall times
    • Constant current priority setting reduces voltage and current overshoot when powering LEDs
    • Programmable output resistance simulates battery output
    • Can display output current or output voltage
    • USB, LAN standard, GPIB optional
    • Fit six 71mm wide 360W units or three 142mm wide 720W units; or two 214mm wide 1080W units in a standard rack width to minimize bench and test system space
    • Three-year warranty

    Programmable DC Power Supplies
    Source a wide range of voltages and currents with the Series 2260B Programmable DC Power Supplies. Choose from 12 versions with voltage output of 30V, 80V, 250V or 800V. The 360W versions can output current of 36A, 13.5A, 4.5A, or 1.44A; the 720W models can output 72A, 27A, 9A, or 2.88A; and the 1080W instruments can output 108A, 40.5A, 13.5A or 4.32A. This wide range of output voltages and current, combined with multiple interface choices, makes the Series 2260B ideal for use in a wide range of applications, including research and design, quality control, and production test.

    Flexible and Fast for Automated Test Systems
    The Series 2260B power supplies will work in any automated system because they can interface to a controller with either a USB, LAN, or optional GPIB interface. Furthermore, the Series 2260B supplies have fast discharge capability to dissipate the voltage on the output quickly. These supplies also have a fast transient recovery time to load changes. The combination of the fast discharge time and the fast transient response helps minimize critical test time in automated test systems.

    Control the Voltage or Current Rise Time to Reduce Inrush Current and Prevent Device Damage
    Series 2260B power supplies have programmable rise time (or slew rate) control to prevent potentially dangerous inrush currents from flowing into loads that have low resistance when power is initially supplied. Either voltage or current rise time can be controlled. Programming a current rise time puts the Series 2260B power supplies in a constant current control priority mode in which the current slew rate limits the rate at which the voltage rises across the device under test (DUT.) In addition to controlling rise time, fall time can also be programmed; fall time values can be different from rise time values. Delivery of power to a load can be precisely controlled to prevent overshoot spikes and excessive amounts of inrush current, eliminating damage to components, modules, or devices and generating more precise characteristic I-V curves for components such as LEDs.

    Emulate the Response of a Battery
    Test a circuit or device under the most realistic conditions by applying a test source with the output resistance that is equivalent to the output resistance of the actual source that will be used to power the circuit or device. For example, a battery has a varying internal resistance, and a device powered by a battery will have a voltage applied to the device that is reduced by the voltage drop across the battery's internal resistance.

    Create Custom Voltage Source Waveforms
    An internal test sequence mode allows the Series 2260B supplies to output a set of voltage levels for varying time intervals at each level. The test sequence can be stored and used repeatedly to determine DUT performance at number of voltage levels. In addition, the analog input control can be used to create voltage profiles that simulate how a battery responds to a fast changing load current requirement such as a large inrush current. Also, generate a combined DC output level with an AC signal superimposed on it to test how a circuit responds to noise on its DC power source. The analog input control parameter can be either a voltage input or a resistance input. With this analog control capability, numerous types of DC supply signals can be generated to test circuits and devices under a wide range of circumstances.

    Flexible and Fast for Automated Test Systems
    With their USB, LAN, or optional GPIB interfaces, Series 2260B power supplies will work in any automated system. In addition, these power supplies have an analog control capability that can control outputs via an external voltage and resistance. Furthermore, Series 2260B power supplies feature fast discharge capability to quickly dissipate the voltage on the output. These power supplies also have a fast, 1ms transient recovery time to load changes. This combination of fast discharge time and fast transient response minimizes critical test time in automated test systems.

    Includes: Basic Accessory Kit, Quick Start Guide Documentation CD with Manuals and Software Drivers, Test Lead Set, USB Cable, Power Cord and Certificate of Traceable Calibration.

    Keithley 2260B Series includes these 12 models:

    360 Watts* 2260B-30-36 2260B-80-13 2260B-250-4 2260B-800-1
    Voltage 0 – 30 V 0 – 80 V 0 – 250 V 0 – 800 V
    Current 0 – 36 A 0 – 13.5 A 0 – 4.5 A 0 – 1.44 A
    720 Watts* 2260B-30-72 2260B-80-27 2260B-250-9 2260B-800-2
    Voltage 0 – 30 V 0 – 80 V 0 – 250 V 0 – 800 V
    Current 0 – 72 A 0 – 27 A 0 – 9 A 0 – 2.88 A
    1080 Watts* 2260B-30-108 2260B-80-40 2260B-250-13 2260B-800-4
    Voltage 0 – 30 V 0 – 80 V 0 – 250 V 0 – 800 V
    Current 0 – 108 A 0 – 40.5 A 0 – 13.5 A 0 – 4.32 A

    *NOTE: V * A output cannot exceed the power rating.