ENA Series - The Best Balance Between Price and Performance

The Keysight E5063A ENA series is a cost-effective benchtop vector network analyzer (VNA) designed for testing basic passive components like antennas, filters, cables, and connectors up to 18 GHz. It offers an optimal balance of price and performance to meet both business and technical needs. The E5063A is also future-proof, ready to adapt as technologies evolve. Available in various frequency ranges from eight options (500 MHz, 1.5 GHz, 3 GHz, 4.5 GHz, 6.5 GHz, 8.5 GHz, 14 GHz, and 18 GHz) based on your testing requirements and budget. Additionally, the frequency upgradability feature allows you to begin with the more affordable 500 MHz option and upgrade to higher frequencies up to 18 GHz as needed. It helps you optimize your investment for both current and future needs.

Applications for the E5063A series include testing antennas for smartphones, cellular base stations, WLAN, and other wireless communication devices; RF passive components such as filters, cables, connectors, attenuators, couplers, isolators, and dividers; impedance testing of PCBs; wireless power transfer coils/resonators; and dielectric materials.

About the E5063A/019/215/722/732 VNA, 100 kHz to 1.5 GHz

Utilizing the consistent measurement framework of the industry-standard ENA Series, the E5063 enhances efficiency and productivity. Its trace noise has best-in-class performance comparable to higher-end ENA models and features accurate measurements of low-loss devices. Additionally, its dynamic range satisfies the test requirements of simple RF passive components. The E5063A is a safe investment to lower your total cost of ownership. This is a configurable product. Call TestEquity for more available options.

Configurations Include

• (019) Standard storage drive

• (215) 100 kHz to 1.5 GHz

• (722) Without GPIB interface

• (732) Without handler I/O interface

Features And Specifications

• Measure a wide range of components with 2-port,
  50-ohm S-parameter test set

• Trace Noise: 0.005 dBrms (spec), 0.002 dBrms (typ.)

• Dynamic Range: 117 dB (spec), 122 dB (typical)

• Stability: 0.01 dB/Celsius

• Source power: -20 to 0 dBm

• Sweep type: Linear & Log frequency, Segment

• NOP: 10,001 points (Max.)

• Channel: 32 channels (Max.)

• Interface LAN, USB (front 2, rear 4), USBTMC (Optional: GPIB, Handler I/O)

• Display: 10.4 inch multi-touchscreen

• Operating system: Windows 10

• Upgrade options at any time

• Three-year warranty

Other Highlights

• Time domain/Test Wizard, for PCB measurements (011 - optional)

• Wireless power transfer analysis (006 - optional)

• Limit test (Limit line, Ripple limit, Bandwidth limit, Point limit)

• Fixture simulator, Equation editor

• U1810B/U1816A/C USB switch support

• Compatible with N755xA series of 2-port ECal modules

Proven Calibration And Analysis Capabilities

The E5063A fully supports major calibration and data analysis capabilities that are compatible with the E5071C and required for testing RF passive components. With these proven capabilities, the E5063A provides measurements consistent with the industry standard E5071C.

Calibration Capabilities

• SOLT cal (with known thru, or unknown thru)

• Adapter removal/insertion

• ECal (Electronic Calibration)

• TRL cal

Fixture Simulator

• Virtual matching circuit embedding

• De-embedding

• Port-Z conversion

• 1-port mixed-mode S-parameters

Data Analysis

• Equation editor

• Point limit (for antennas)

• Ripple & Bandwidth limit (for filters)

• Single marker search for max, min, peak, or target value

• Multiple marker search for peaks or target values

What's in the Box

• E5063A/019/215/722/732 Network Analyzer

• Installation guide

• CD ROM IO libraries

• Power cable

• Calibration certificate