GW Instek MDO-2102EG Mixed Domain Oscilloscope, 2 Channel, 100 MHz, 10 Mpts, 1 GS/s, MDO-2000E Series
Our Part #30240.1
Mfr Part #MDO-2102EG
GW Instek MDO-2102EG Mixed Domain Oscilloscope, 2 Channel, 100 MHz, 10 Mpts, 1 GS/s, MDO-2000E Series
Our Part #30240.1
Condition:New
Mfr Part #MDO-2102EG
- Description
- Specifications
- Documents
MDO-2000EG Spectrum Analyzer and a Dual Channel 25 MHz Arbitrary Waveform Generator
- 100MHz, 2-ch, DSO, Spectrum analyzer, dual channel 25MHz AWG
- Real time sample rate for each channel is 1GSa/s (2 channel models)
Maximum real time sample rate is 1GSa/s (4 channel models) - Per Channel 10M memory depth and VPO waveform display technology
- Waveform update rate up to 120,000 wfms/s
- 8in WVGA TFT LCD display
- Free Frequency Response Analyzer Software
- Maximum 1M FFT provides higher frequency domain resolution measurements
- High ,low and band pass filter functions
- 29,000 segmented memories and waveform search functions
- I2C/SPI/UART/CAN/LIN serial bus trigger and decoding function
- Data log function is able to track signal changes up to 1000 hours
- Network storage function
- Mask test function
The Instek MDO-2000E is a multi-functional mixed domain oscilloscope, with all models including both a spectrum analyzer and 25 MHz arbitrary waveform generator. The MDO-2000E is available in several bandwidth and channel combinations. MDO-2000EX models add a built-in 5V/1A power supply and 5000 counts multimeter. The following is an overview of available models:
| Model | MDO-2204E(G/X) | MDO-2202E(G/X) | MDO-2104E(G/X) | MDO-2102E(G/X) | MDO-2074E(G/X) | MDO-2072E(G/X) |
|---|---|---|---|---|---|---|
| Bandwidth | 200 MHz | 200 MHz | 100 MHz | 100 MHz | 70 MHz | 70 MHz |
| Channels | 4 | 2 | 4 | 2 | 4 | 2 |
| Record Length | 10 M/ch | 10 M/ch | 10 M/ch | 10 M/ch | 10 M/ch | 10 M/ch |
| Real-time Sampling Rate |
Max. 1 GSa/s | Per Channel 1 GSa/s | Max. 1 GSa/s | Per Channel 1 GSa/s | Max. 1 GSa/s | Per Channel 1 GSa/s |
| Built-in | MDO-2000EG: Spectrum Analyzer; Dual Channel 25MHz Arbitrary Waveform Generator MDO-2000EX: Spectrum Analyzer; Dual Channel 25MHz Arbitrary Waveform Generator; Power Supply and DMM |
|||||
Spectrum Analysis Mode
While entering the spectrum mode, the MDO-2000E series will display a full screen of the frequency domain. Users can input Center frequency, Span, Start frequency, and Stop frequency based upon test requirements so as to rapidly and intuitively observe required frequency range that allows users to experience the user interface of a real spectrum analyzer. While observing frequency domain display, engineers can observe waveform characteristics, which are not easy to be seen from time domain waveforms, for instance, the harmonic composition of a waveform and the frequency characteristics of a modulation signal. Compared with oscilloscope FFT, the MDO-2000E series allows engineers to effectively conduct signal measurements on the frequency domain.
MDO-2000E series frequency domain also includes Spectrum Trace Type settings (Normal, Max-hold, Min-hold, and Average) (Figure 1). Users can freely select various Spectrum Traces for simultaneous display. Detection method (Sample, +Peak, -Peak, and Average) (Figure 2) can be individually set for each Trace. Additionally, users, via Cursor, can manually mark the corresponding positions to reflect Frequency and Amplitude. The Search function can also be applied to the log spectrum's Peak Table. Amplitude is displayed with dB and Marker can obtain measurement data. Users can use the Search function to search and mark the amplitude and frequency of the spectrum signal. Search methods include Max. peak and threshold. Measurement results can be displayed and saved.
In The Box
- Quick start guide
- User manual on CD
- Power cord
- GTL-110 BNC-BNC cable x2
- GTP-100B-4 switchable passive probe (100 MHz, 10:1/1:1), Quantity: 2