Keysight DSOX1202G Digital Storage Oscilloscope with WaveGen
- Bandwidth: 70 MHz
- Analog Channels: 2 Chan
- Condition: New
- Drill Down Description: Digital Storage Oscilloscope with WaveGen
- Model: DSOX1202G
- Quote Required: No
- Web Meta Description: Keysight's InfiniiVision DSOX1202G oscilloscope with WaveGen offers quality and industry-proven technology in a value-priced oscilloscope. Now it's easy to get professional measurements and accessible
Limited Time Offer – Get a free DSOxBODE with purchase of EDUX1052G, DSOX1202G, and DSOX1204G! Offer ends May 31, 2021.
- 70 MHz – upgradable to 100 MHz or 200 MHz
- Sample rate: 2 GSa/s
- Update rate: 200,000 wfms/sec with Keysight MegaZoom IV technology
- Maximum memory depth: 2 Mpts
- Display: 7-inch TFT LCD WVGA
- Mask Limit testing
- Segmented memory
- WaveGen (built-in 20 MHz function generator with modulation capability)
- Frequency response analysis (Bode gain & phase plots)
- Integrated digital voltmeter and frequency counter
- Serial protocol analysis: I²C, SPI, CAN, LIN, RS-232/422/485/UART
- Waveform Math: Add, subtract, multiply, divide, FFT (magnitude and phase), low pass filter
- Up and running quickly with built-in help and training signals
- USB 2.0 (host and device), LAN, BenchVue software included
- Three-year warranty
Keysight's InfiniiVision 1000 X-Series oscilloscopes are engineered to give you quality, industry-proven technology at unbelievably low prices. Now it's easy to get professional measurements and accessible expertise at your fingertips. Don't settle for less – and test to impress.
6-in-1 instrument integration
Get professional-level oscilloscope functionality with industry-leading software analysis and 6-in-1 instrument integration. The 1000 X-Series gives you the following functionality that will save you money and valuable bench space.
The 1000 X-Series is a family of low-cost oscilloscopes that don't compromise on quality. Each model has measurement and standard software analysis capability that rivals oscilloscopes 3x the price.
WaveGen (built-in 20 MHz function generator with modulation capability)
(EDUX1052G, DSOX1202G, and DSOX1204G models only)
The 1000 X-Series offers an integrated 20 MHz function generator with modulation capability. It's ideal for educational or design labs where bench space and budget are at a premium. The integrated function generator provides stimulus output of sine, square, ramp, pulse, DC and noise waveforms to your device under test. Add modulation to the signal with customizable AM, FM and FSK settings. No need to buy a separate function generator when you can get one integrated into your new oscilloscope.
Hardware-based serial protocol decode and triggering
The 1000 X-Series is a powerful protocol analyzer that enables hardware-based specialized serial communication analysis (standard). Other vendors' oscilloscopes use software post-processing techniques that slow down the waveform and decode update rate, but the 1000 X-Series has faster decoding based on hardware technology that enhances scope usability and the probability of capturing infrequent serial communication errors.
The EDUX models support I2C and UART/RS232 (standard). The DSOX models support I2C, SPI, UART/RS232, CAN and LIN (standard).
Frequency Response Analyzer
(EDUX1052G, DSOX1202G, and DSOX1204G models only)
Frequency response analysis (gain & phase Bode plots) is a critical measurement to characterize amplifiers, passive networks, and power supply feedback networks. Bode plots are also fundamental concepts that every electrical engineering student should learn. The 1000 X-Series' frequency response analyzer capability (standard in “G” models) is the perfect tool to help students understand the gain and phase performance of passive RLC circuits and amplifiers. This capability is achieved with a gain and phase measurement versus frequency (Bode plot). Vector network analyzers (VNAs) and low-cost frequency response analyzers are typically used for these measurements, but now an easy-to-use and affordable gain and phase analysis is possible by utilizing the 1000 X-Series' built-in WaveGen and Bode plot capability.
The 1000 X-Series has an integrated 3-digit voltmeter (DVM) inside each oscilloscope. The voltmeter operates through probes connected to the oscilloscope channels, but its measurement is decoupled from the oscilloscope triggering system so both the DVM and triggered oscilloscope measurements can be made with the same connection. You can quickly measure AC RMS, DC, and DC RMS without configuring the oscilloscope capture. The voltmeter results are always displayed, keeping these quick characterization measurements at your fingertips. The built-in DVM comes standard in 1000 X-Series oscilloscopes.
There is an integrated 5-digit frequency counter inside each oscilloscope. The frequency counter operates through probes connected to the oscilloscope channels so that both the counter and triggered oscilloscope measurements can be made with the same connection. You can quickly measure frequency without configuring the oscilloscope capture. The high-resolution frequency measurement results are always displayed, keeping these quick characterization measurements at your fingertips.
Educator's Oscilloscope Training Kit
The Educator's Oscilloscope Training Kit (standard) provides an array of built-in training signals so that electrical engineering and physics students can learn what an oscilloscope does and how they can perform basic oscilloscope measurements. Also included in the kit is a comprehensive oscilloscope lab guide and tutorial written specifically for the undergraduate student. Keysight also provides a PowerPoint slide-set that professors and lab assistants can use as a pre-lab lecture on oscilloscope fundamentals. This lecture takes about 30 minutes and should be presented before electrical engineering and physics students begin their first circuits lab. Note that this PowerPoint slide-set also includes a complete set of speaker notes.
Connectivity and remote control
Built-in USB host and USB device ports make PC connectivity easy. BenchVue Software with the BV0004B BenchVue Oscilloscope app (standard) lets you control and visualize the 1000 X-Series and multiple measurements simultaneously. Build automated test sequences just as easy as using your front panel. Save time with the ability to export measurement data to Excel, Word, and MATLAB in three clicks. Monitor and control your 1000 X-Series with a mobile device from anywhere. Standard LAN port supports remote web-based virtual front panel to control and to save data or images.
Includes: Passive Probes (Two N2142A for EDUX1052A/G; Two N2140A for DSOX1202A/G; Four N2140A for DSOX1204A/G), Standard Secure Erase, Power Cord, 3-Year Warranty, Certificate of Calibration.
|50 MHz||70 MHz |
(100 MHz, 200 MHz)
|70 MHz |
(100 MHz, 200 MHz)
|Channels||2 channel + external digital channel||4 channel|
|Max Sample rate||1 GSa/s||2 GSa/s|
|Memory||200 kpt||2 Mpts|
|Update rate||100,000 wfms/s||200,000 wfms/s|
|Display||7 inch WVGA|
|Connectivity||LAN, USB host, USB device|
|FRA (Bode Plots)||No||Included||No||Included||No||Included|
|Serial||I2C, RS232/UART||I2C, SPI, RS232/UART, CAN, LIN|
|Mask Testing||No||Included (200,000 tests/sec)|
|Warranty||3-year included, 5-year upgradable|