Keysight PP0001A 1 GHz Hi-Z+ Probe

• 1 GHz of analog bandwidth (<4 pF input capacitance)
• 300 Vrms CAT II input voltage, and up to 1.5 kV peak transient overvoltage
• 10 MΩ input impedance at low frequencies
• AutoProbe I compatibility
• 1.3 meter cable length for ease of use
• Small 5mm tip and compact probe design for easy probing on smaller targets
• Variable attenuation, automatically configured by the oscilloscope
• Rigid tip for secure device-under-test connectivity
• Replaceable probe tip cartridges
• Large accessory set for versatile connectivity

The PP0001A is Keysight’s first passive probe with up to 1GHz of analog bandwidth with less than 4 pF of capacitive loading. It provides all the ease of use benefits of a passive probe, with the performance generally seen from an active probe. The AutoProbe I interface provides offset and auto-configuration of probe type and attenuation setting.

The PP0001A is designed for use on InfiniiVision and Infiniium oscilloscopes with the AutoProbe I interface, with the use of the PP0004A adapter. The PP0001A/2A/3A probes are a new generation of Hi-Z+ probes for which the probe is to be viewed as a combination of the “probe and probe adapter (PP0004A)”. This combination does not have a fixed attenuation ratio but rather has multiple available attenuation ratios per given V/div settings to accommodate a very large dynamic range and flat frequency response.

• Channel identification rings (4 each, in 4 colors)
• Grabber hook tip
• Ground clip
• Ground spring (x2)
• BNC to probe tip adapter
• Probe tip cartridge, 300 V rating
• Protective tip covers (x2)
• Adapter for PP0001A, PP0002A, PP0003A