FLUKE-NORMA 6004 Four-Channel Power Analyzer

The Fluke 6004 includes four measurement channels giving it the capability to measure three-phase power and DC power simultaneously to enable real-time inverter efficiency measurements under real-world conditions. The instrument’s compact, battery-powered design (only 9.6 cm thick) combined with a wideband frequency response makes it easier than ever to make measurements on hard to access systems such as inverter drive systems, DC-AC and AC-DC power conversion systems and electric motors without removing them from service.

Norma 6004 Facts

• Inputs: 4 Voltage + 4 Current

• Input Impedance: 2M Ω/10pF (Typical)

• Measurement Range: 1000 V ac rms, 1500 V dc

• Current Range: 2000 A ac rms, +/- 2000 A dc

• Specs: 500kHz bandwidth, 200ks/s sample rate, 0.1% accuracy

• Key Measurements: Voltage, Current, Active Power, Reactive Power, Apparent Power, Power Factor and Harmonics with associated values

• Safely Measures: CAT III 1000V, CAT IV 600V environments

• Storage Capacity: 32GB

• Interface: USB and RS485, and open communication protocol

• Display: 5.7 inch, TFT LCD, 640x480

Features

• Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability—configurable to 6 or 8 channels using dual analyzer synchronization.

• Measure three phase power and DC output power at the same time with 3 or 4 channel models, with voltage and current inputs on each channel.

• View critical data in the field on the main display—Meter, Waveform, Harmonics up to the 100th, Vector and Trend.

• Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels.

• User adjustable measurement rate from 100ms to 1s with continuous logging via 32GB of onboard storage.

• Operate continuously for up to 10 hours without an external power supply using the 5000mAh Li-ion Internal Battery.

• Online measuring, data download and analysis with included PC software.

• Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485.

Port Interface Panel Tour

1. Voltage/current input channel number

2. Current port protection cover

3. Voltage input port

4. Current input port

5. Input port for external current sensor

Norma 6000 Series - Take Precision Power Measurements Almost Anywhere

The Fluke Norma 6000 Series Wideband Precision Power Analyzers are designed for portability, allowing measurements to be taken directly at the load in almost any environment. Measuring at the load provides insight into how equipment performs under real-world conditions and variables, rather than only in controlled settings such as a test bench or laboratory.

Four model options are available, with or without an input port for motor speed/torque signals. All models feature a 200 ks/s sample rate and with optional accessories  can even measure up to 1,500 V DC and 2,000 A AC+DC.

What's in the Box

1. FLUKE-NORMA 6004 power analyzer

2. Power supply adapter

3. Power cord

4. Test leads, 1.5m, (4) red, (4) black, (4) blue
   Test leads, 0.18m, (8) blue
   Alligator clips, (4) red, (4) black, (4) blue

5. USB (mini B) cable

6. RS-485/synchrony adapter (3.81mm, black, 3 pin)

7. USB Flash Drive for PC SW and User Manual

8. Soft case