TestEquity
Refresh your bench. Save 10%. 3 categories. One order. Offer ends May 29. Shop The Promo
You’re in the right place. Techni-Tool and Jensen are now TestEquity. Learn more
 
Miller-Stephenson

Miller-Stephenson GPL206 Krytox Grease, 2 oz tube, GPL 200-207 Series

Our Part #447-697

Mfr Part #GPL206

Miller-Stephenson GPL206
Miller-Stephenson

Miller-Stephenson GPL206 Krytox Grease, 2 oz tube, GPL 200-207 Series

Our Part #447-697

Condition:New

Mfr Part #GPL206

$78.51EACH
Multiples of: 2

Condition:New

Krytox™ GPL 206 grease has an Oil Viscosity of 243 cSt at 40°C and the estimated useful temperature range is -36°C to 260°C.

Krytox™ GPL 206 Grease | General-Purpose Lubricants

H-1 Certified For Incidental Food Contact, Chemically Inert Lubricants

Krytox GPL 206 greases are based on perfluoropolyether (PFPE) oils. This series of synthetic fluorinated lubricants are used in extreme conditions such as continuous high temperatures up to 260°C (500°F) and will survive short term peak temperatures of up to 270°C (518°F). Chemically inert and safe for use around most chemicals, these lubricants are nonflammable and are also safe for use in oxygen service.

Krytox GPL 206 grease does not damage plastics or elastomers nor cause corrosion to metals. They are commonly used as lubricants in aerospace, automotive, industrial, and semiconductor applications as well as in solving many other routine lubrication problems. In addition, they provide exceptionally long lifetimes in sealed-for-life bearings and extend relubrication intervals in bearings that require relubrication.

The Krytox GPL 206 grease is PTFE thickened, contains no additives, and can be used on components that come in contact with chemicals. Typical applications include valves, instruments, or bearings in contact with chemicals including alcohols, ammonia, solvents, steam, acids and bases, and oxygen systems including LOX and GOX. They are commonly used as seal and o-ring lubricants and are compatible with all types of seals.

Why Krytox GPL 206 Grease?

New components often have organic rust preventive oils or greases on them to prevent damage while they are in storage before use. New bearings should be inspected for damage and cleanliness before use. The components must be completely cleaned of greases or preservative oils when using Krytox as a lubricant. Failure to do so could result in reduced bearing life. Bearing life tests on un-cleaned bearings have shown reduced life in high temperature, high-speed tests where the bearing was filled with a minimum amount of grease.


BrandMiller-Stephenson
TypePFPE (Krytox)
Active IngredientsPFPE
Container Size2 oz.
Container TypeTube
SeriesGPL 200-207 Series
 
$78.51EACH
Multiples of: 2